Abstract:A new lower tungsten divertor has been developed and installed in the EAST superconducting tokamak to replace the previous graphite divertor with power handling capability increasing from <2 MW m−2 to ∼10 MW m−2, aiming at achieving long-pulse H-mode operations in a full metal wall environment with the steady-state divertor heat flux of ∼10 MW m−2. A new divertor concept, ‘corner slot’ (CS) divertor, has been employed. By using the ‘corner effect’, a strongly dissipative divertor with the local buildup of high neutral pressure near the corner can be achieved, so that stable detachment can be maintained across the entire outer target plate with a relatively lower impurity seeding rate, at a separatrix density compatible with advanced steady-state core scenarios. These are essential for achieving efficient current drive with low-hybrid waves, a low core impurity concentration and thus a low loop voltage for fully non-inductive long-pulse operations. Compared with the highly closed small-angle-slot divertor in DIII-D, the new divertor in EAST exhibits the following merits: (1) a much simpler geometry with integral cassette body structure, combining vertical and horizontal target plates, which are more suitable for actively water-cooled W/Cu plasma facing components, facilitating installation precision control for minimizing surface misalignment, achieving high engineering reliability and lowering the capital cost as well; (2) it has much greater flexibility in magnetic configurations, allowing for the position of the outer strike point on either vertical or horizontal target plates to accommodate a relatively wide triangularity range, δ l = 0.4–0.6, thus enabling to explore various advanced scenarios. A water-cooled copper in-vessel coil has been installed under the dome. Five supersonic molecular beam injection systems have been mounted in the divertor to achieve faster and more precise feedback control of the gas injection rate. Furthermore, this new divertor allows for double null divertor operation and slowly sweeping the outer strike point across the horizontal and vertical target plates to spread the heat flux for long-pulse operations. Preliminary experimental results demonstrate the ‘corner effect’ and are in good agreement with simulations using SOLPS-ITER code including drifts. The EAST new divertor provides a test-bed for the closed divertor concept to achieve steady-state detachment operation at high power. Next step, a more closed divertor, ‘sharp-cornered slot’ divertor, building upon the current CS divertor concept, has been proposed as a candidate for the EAST upper divertor upgrade.

Manufacturing, installation, commissioning and operation of endoscopes for monitoring water-cooled divertor in Wendelstein 7-X

A divertor scraper observation system for the Wendelstein 7-X stellarator

Stable heat and particle flux detachment with efficient particle exhaust in the island divertor of Wendelstein 7-X

Pop-up Langmuir probe diagnostic in the water cooled divertor of Wendelstein 7-X

Real-Time Detection of Overloads on the Plasma-Facing Components of Wendelstein 7-X

Optical design study of an infrared visible viewing system for Wendelstein 7-X divertor observation and control

Plasma-wall interaction studies in W7-X: main results from the recent divertor operations

First operation and validation of simulations for the divertor cryo-vacuum pump in Wendelstein 7-X

Improvement in the simulation tools for heat distribution predictions and control of baffle and middle divertor loads in Wendelstein 7-X

The Realization of a Gas Puff Imaging System on the Wendelstein 7-X Stellarator

WEST full tungsten operation with an ITER grade divertor

First neutral beam experiments on Wendelstein 7-X

Physics Design of New Lower Tungsten Divertor for Long-Pulse High-Power Operations in EAST

Development of the 174 GHz collective Thomson scattering diagnostics at Wendelstein 7-X

Final opto-mechanical design of ex-vessel components for the Wide Angle Viewing System diagnostic for ITER Equatorial Port 12

Design and analysis of actively-cooled, edge-transport diagnostic for long-pulsed operation in WEST

Understanding baffle overloads observed in high-mirror configuration on Wendelstein 7-X

Analysis of the neutral fluxes in the divertor region of Wendelstein 7-X under attached and detached conditions using EMC3-EIRENE

Design of an infrared/visible endoscope system for HL-3 divertor observation

Development of a compact bolometer camera concept for investigation of radiation asymmetries at Wendelstein 7-X

Simulation of a scintillator-based fast ion loss detector for steady-state operation in Wendelstein 7-X (invited)