Abstract:A new lower tungsten divertor has been developed and installed in the EAST superconducting tokamak to replace the previous graphite divertor with power handling capability increasing from <2 MW m−2 to ∼10 MW m−2, aiming at achieving long-pulse H-mode operations in a full metal wall environment with the steady-state divertor heat flux of ∼10 MW m−2. A new divertor concept, ‘corner slot’ (CS) divertor, has been employed. By using the ‘corner effect’, a strongly dissipative divertor with the local buildup of high neutral pressure near the corner can be achieved, so that stable detachment can be maintained across the entire outer target plate with a relatively lower impurity seeding rate, at a separatrix density compatible with advanced steady-state core scenarios. These are essential for achieving efficient current drive with low-hybrid waves, a low core impurity concentration and thus a low loop voltage for fully non-inductive long-pulse operations. Compared with the highly closed small-angle-slot divertor in DIII-D, the new divertor in EAST exhibits the following merits: (1) a much simpler geometry with integral cassette body structure, combining vertical and horizontal target plates, which are more suitable for actively water-cooled W/Cu plasma facing components, facilitating installation precision control for minimizing surface misalignment, achieving high engineering reliability and lowering the capital cost as well; (2) it has much greater flexibility in magnetic configurations, allowing for the position of the outer strike point on either vertical or horizontal target plates to accommodate a relatively wide triangularity range, δ l = 0.4–0.6, thus enabling to explore various advanced scenarios. A water-cooled copper in-vessel coil has been installed under the dome. Five supersonic molecular beam injection systems have been mounted in the divertor to achieve faster and more precise feedback control of the gas injection rate. Furthermore, this new divertor allows for double null divertor operation and slowly sweeping the outer strike point across the horizontal and vertical target plates to spread the heat flux for long-pulse operations. Preliminary experimental results demonstrate the ‘corner effect’ and are in good agreement with simulations using SOLPS-ITER code including drifts. The EAST new divertor provides a test-bed for the closed divertor concept to achieve steady-state detachment operation at high power. Next step, a more closed divertor, ‘sharp-cornered slot’ divertor, building upon the current CS divertor concept, has been proposed as a candidate for the EAST upper divertor upgrade.

First operation and validation of simulations for the divertor cryo-vacuum pump in Wendelstein 7-X

Stable heat and particle flux detachment with efficient particle exhaust in the island divertor of Wendelstein 7-X

Numerical simulation of neutral gas dynamics in the W7-X sub-divertor

Plasma-wall interaction studies in W7-X: main results from the recent divertor operations

Improvement in the simulation tools for heat distribution predictions and control of baffle and middle divertor loads in Wendelstein 7-X

The Effects of Magnetic Topology on the Scrape-off Layer Turbulence Transport in the First Divertor Plasma Operation of Wendelstein 7-X Using a New Combined Probe

First neutral beam experiments on Wendelstein 7-X

Manufacturing, installation, commissioning and operation of endoscopes for monitoring water-cooled divertor in Wendelstein 7-X

Pop-up Langmuir probe diagnostic in the water cooled divertor of Wendelstein 7-X

Diagnostic developments for quasicontinuous operation of the Wendelstein 7-X stellarator.

Assessment of the W7-X High Heat Flux Divertor with Thermo-Mechanical Analysis

The Realization of a Gas Puff Imaging System on the Wendelstein 7-X Stellarator

Thermo-mechanical analysis of the Wendelstein 7-X divertor

Thermo-mechanical Analysis of Wendelstein 7-X Plasma Facing Components

FE Simulation of the Wendelstein 7-X Cryostat System

Key results from the first plasma operation phase and outlook for future performance in Wendelstein 7-X

Simulation of radio-frequency heating and fast-ion generation in Wendelstein 7-X

Physics Design of New Lower Tungsten Divertor for Long-Pulse High-Power Operations in EAST

Steady State Challenge For Soft X-Ray Diagnostics On Wendelstein

Analysis of the neutral fluxes in the divertor region of Wendelstein 7-X under attached and detached conditions using EMC3-EIRENE

Numerical Simulation of Cavitation by Sub-Surface Vortex (1st Report, High-Precision Numerical Simulation Scheme for Vortical Flow)