Abstract:The recovery of metal from copper slag is of great significance to the resource utilization of copper slag and the sustainable development of copper smelting industry. Currently, hydrometallurgy is the traditional method used to recover mineral metals. However, as copper slag is a silicate mineral, the traditional acid-leaching process of metal results in the leaching of Si, resulting in the formation of silica gel. The silica gel can inhibit the recovery of metal while making metal difficult to separate from Si and causing filtration problems. This study proposed a two-stage method (evaporation + water washing) to selectively recover Fe and Zn from copper slag. Under the optimal conditions (evaporation: H 2 SO 4 = 3 M; time = 60 min; temperature = 120°C; and liquid–solid ratio = 4; water washing: liquid–solid ratio = 5), the leaching efficiency of Fe, Zn, and Si reached 99.94 %, 97.40 %, and 0.15 % respectively. The separation mechanism was determined through mineral characterization (XRD, SEM, HRTEM-EDS, SAED, AFM, etc.) and the application of DLVO theory. It was found that H + destroyed the Fe 2 SiO 4 structure in copper slag during the evaporation stage, which promoted the release of Fe and Zn, forming soluble sulfate crystals. Simultaneously, evaporation increased the ion concentration, reducing the repulsive force between colloids, resulting in the aggregation and precipitation of silica gel into stable amorphous silica. After washing, soluble sulfate is dissolved in water. The recovered Fe can be processed to get red iron oxide (96.32 % purity), the Zn-containing solution can be recycled for electrolytic Zn, and the residue can be used to prepare geopolymer (52.47 MPa, 28 days). The two-stage method for recovering metals from copper slag is highly efficient and provides valuable insights into resource utilization of metals and Si in silicon-containing solid wastes.

A Novel Process for Silver Enrichment from Kaldo Smelting Slag of Copper Anode Slime by Reduction Smelting and Vacuum Metallurgy

Separation and Enrichment of Au and Ag from Lead Anode Slime by a Selective Oxidation–Vacuum Volatilization–Carbon Reduction Process

Recovery of valuable metals from electroplating sludge with reducing additives via vitrification

One step to direct extracted gold and silver from industrial Cu-Ag-Sb-Au alloy by a convenient bimetallic electrolytic separation process

An environmentally-friendly method to recover silver, copper and lead from copper anode slime by carbothermal reduction and super-gravity

An environmentally friendly system for high efficient silver recovery from anode slime

Reviving Riches: Unleashing Critical Minerals from Copper Smelter Slag Through Hybrid Bioleaching Approach

Leaching Behavior of the Main Metals of Decopperized Anode Slime

A metallurgical approach for separation and recovery of Cu, Cr, and Ni from electroplating sludge

A green and economical process for resource recovery from precious metals enriched residue of copper anode slime

An integrated and sustainable hydrometallurgical process for enrichment of precious metals and selective separation of copper, zinc, and lead from a roasted sand

Occurrence Behaviors of As/Sb/Bi in Copper Anode Slime and Their Separation by Compound Leaching Followed by Stepwise Precipitation

A future application of pulse plating – silver recovery from hydrometallurgical bottom ash leachant

Near-complete recycling of real mix electroplating sludge as valuable metals via Fe/Cr co-crystallization and stepwise extraction route

Cleaning of high antimony smelting slag from an oxygen-enriched bottom-blown by direct reduction

Recovery of lead and silver from zinc acid-leaching residue via a sulfation roasting and oxygen-rich chlorination leaching method

Study on Hydrometallurgical Process for Copper Anode Mud(Ⅲ).——Extraction of Silver

Bioleaching of Copper-Containing Electroplating Sludge

Sb recovery from an As pre-removed lead anode slime using a ZnS-Na2CO3 smelting reduction

A novel strategy for harmlessness and reduction of copper smelting slags by alkali disaggregation of fayalite (Fe2SiO4) coupling with acid leaching

Two-stage method recovery of metals from copper slag: Realize the resource utilization of all components