Abstract:Ultrahigh voltage conversion ratio (VCR) DC-DC boost converters are essential for biomedical, optics, sensing and diagnostics applications. For realizing an ultrahigh VCR, the conventional boost converter would result in a large duty ratio D, a large inductor current $\mathrm{I}_{\mathrm{L}}$ and thus a significantly degradation on power efficiency, and its VCR is limited by the parasitic resistors. Figure 8.10.1 top shows the recently reported hybrid boost converters. The multilevel boost converter (MLBC) has a single inductor at the input, and has the feature of input-series-output-series. Therefore, multilevel boost converters considerably improve the VCR and reduce the device voltage stress with the flying capacitors. However, the MLBC topologies still suffer from the problems of low efficiency and low power density caused by the large $\mathrm{I}_{\mathrm{L}}$. Another topology with multipath boost converters (MPBC) has the feature of input-parallel-output-parallel. The MPBC can effectively reduce the $\mathrm{I}_{\mathrm{L}}$ of each branch by connecting parallel input inductors. But the output-parallel structure does not improve the VCR nor reduce the device voltage stress. To address the above issues, this work presents a hybrid input-parallel output-series high power density ultrahigh-VCR step-up DC-DC converter for electrostatic and piezoelectric actuators used for small-scale flyweight devices. This converter is very challenging due to the low $\mathrm{V}_{\text{IN}}(\lt5 \mathrm{~V})$, high $\mathrm{V}_{\text {OUT }}(\gt100 \mathrm{~V}$), high output power (>200mW) and high power density (volume $\lt10 \mathrm{~mm}^{3}$ and weight $\lt100 \mathrm{mg}$). We use both $\mathrm{mW} / \mathrm{mm}^{3}$ and $\mathrm{mW} / \mathrm{mg}$ for the power density units to emphasize the importance of the size and weight for flying robots.

An Extremely High Power Density Asymmetrical Back-to-Back Converter for Aerospace Motor Drive Applications

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

Design of a 300 Kw Partial Power Processing Based DC-DC Converter for Electric Vehicles Extreme Fast Charging Stations

Zero sequence blocking transformers for multi-pulse rectifier in aerospace applications

A High Power Density And Efficiency Bi-Directional Dc/Dc Converter For Electric Vehicles

A High Power Density 3-Phase/1-phase Compatible MISN-PFC Converter for On-Board Charger

Design of high-performance bidirectional DC/DC converter applied for more electric aircraft

High-Efficiency High-Density RDCX Modules Cascaded with CHB PFC Stage

An 8A 998A/inch<SUP>3</SUP> 90.2% Peak Efficiency 48V-to-1V DC-DC Converter Adopting On-Chip Switch and GaN Hybrid Power Conversion

Research on High-Performance Multiphase DC–DC Converter Applied to Distributed Electric Propulsion Aircraft

A Single Sided Matrix Converter Drive for a Brushless DC Motor in Aerospace Applications.

Two-Stage Factorized Power Architecture DC–DC Converter for Spacecraft Secondary Power Supply System

A High-Efficiency 12/1-V Dual-Path Series-Capacitor Converter with Low $v\cdot A$ Metric and Full Duty Range

Ultra-Lightweight High-Efficiency Buck-Boost DC-DC Converters for Future eVTOL Aircraft with Hybrid Power Supply

High Power Density Interleaved ZCS 80-kW Boost Converter for Automotive Applications

8.10 A 5V-to-150V Input-Parallel Output-Series Hybrid DC-DC Boost Converter Achieving 76.4mW/mg Power Density and 80% Peak Efficiency

A High-Efficiency High-Power-Density On-Board Low-Voltage DC–DC Converter for Electric Vehicles Application

Research on a High Power Density DC/DC Converter Based on Weinberg Topology

Design and Analysis of an Integrated Modular Motor Drive for More Electric Aircraft

Research on cascaded multilevel converters for dual motor drive systems based on a nine‐switch converter

Back-to-Back Modular Multilevel Converter Topology with DC-Link Switches for High-Power Four-Quadrant Variable Speed Motor Drives