Abstract:Inherent defect of easy oxidation limited further application of carbon fiber/phenolic resin composites in hostile environments. Herein, a combined strategy of matrix modification and fiber coating was proposed to fabricate a novel ceramizable composite containing Al-coated carbon fibers and Ti3SiC2 toward thermal protection materials (TPM), which offered a promising solution to challenge facing long-term thermal protection and load-bearing subject to severe oxidation corrosion and ablation in hypersonic vehicle applications. Oxidation resistance, mechanical strength evolution, phase evolution, microstructure evolution and mechanical strength failure mechanism at elevated temperatures were studied based on thermogravimetric analysis, static ablation test, mechanical test, X-ray diffraction analysis, and scanning electron microscopy coupled with energy dispersive X-ray analysis. The resulting composites exhibited outstanding oxidation resistance, with residue yield at 1600 °C and flexural strength at 1400 °C as high as 87.7% and 31.7 MPa, respectively. It was found that dense multiphase ceramics formed by reactions between Ti3SiC2, O2, pyrolytic carbon (PyC) and N2, acted as oxygen barriers and self-healing agents during static ablation. Besides, the resulting composites exhibited satisfactory ablation resistance and the linear ablation rate was as low as 0.00853 mm/s. Furthermore, ablation mechanisms were revealed based on phase identification, microstructure characterization and thermodynamic calculation analysis. It was revealed that multiphase ceramics composed of PyC, Al coatings, Ti3SiC2, TiC, Al2OC and AlB2 contributed great to the ablation resistance during oxyacetylene ablation.

In-situ formation of ceramic layer on Mo-based composites via laser powder bed fusion

Novel Laser Additive-Manufactured Mo-based Composite with Enhanced Mechanical and Oxidation Properties

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

Powder Fabrication and Laser Additive Manufacturing of MoSiBTiC Alloy

In Situ Synthesized TiC/Mo-based Composites Via Laser Powder Bed Fusion

In-Situ Reduction of Mo-Based Composite Particles During Laser Powder Bed Fusion

Powder Fabrication and Laser Powder Bed Fusion of a MoSiBTiC-La2O3 Alloy

Laser Powder Bed Fusion of MoSiBTiC Alloy Powders Produced by Freeze-Dry Pulsated Orifice Ejection Method

Laser powder bed fusion of Mo2C/Ti-6Al-4V composites with alternately laminated α′/β phases for enhanced mechanical properties

In Situ Alloying Based Laser Powder Bed Fusion Processing of Β Ti–Mo Alloy to Fabricate Functionally Graded Composites

Laser Powder Bed Fusion of an Ultrafine Microstructural In-Situ TiB2/Al Composite with Excellent Mechanical Properties and Thermal Stability at Elevated Temperatures

Carbon Nanotubes As a Unique Agent to Fabricate Nanoceramic/metal Composite Powders for Additive Manufacturing

Laser Additive Manufacturing of Pure Molybdenum Using Freeze-Dry Pulsated Orifice Ejection Method-Produced Powders

High Performance NbMoTa–Al2O3 Multilayer Composite Structure Manufacturing by Laser Directed Energy Deposition

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders

The formation mechanism of metal-ceramic interlayer interface during laser powder bed fusion

Effect of Hot Isostatic Pressing on the Microstructure and Fracture Toughness of Laser Additive-Manufactured MoSiBTiC Multiphase Alloy

High Performance NbMoTa-Al<sub>2</sub>O<sub>3</sub> Multilayer Composite Structure Manufacturing by Laser Directed Energy Deposition

A novel crack-free Ti-modified Mo alloy designed for laser powder bed fusion

Laser Powder Bed Fusion of CoCrNi Composite with High Fraction of TiC: the Microstructure and Mechanical Properties at Different Temperatures

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2