Abstract:The current “storm” of lightweighting, a revolution in materials, processes, and business models, which is brewing on the horizon of the auto industry, inspires researchers and engineers to develop and apply new wrought magnesium alloys with improved properties. For wider applications in the automotive and aerospace industries, the enhancement of strength, thermal stability and formability of magnesium alloys is required. In recent years, Mg-Zn-Y series alloys have received a considerable attention from the research community due to their improved mechanical properties. The present study was aimed at evaluating the influence of Y addition to Mg-Zn-Mn system based on phase formation, mechanical response and texture development with special attention paid to recrystallization, hot characterization and relative activity. The dissertation evaluated the strain hardening and deformation behavior of as-extruded Mg-ZnMn (ZM31) magnesium alloy with varying Y contents via compression testing at room temperature, 200°C and 300°C. Alloy ZM31+0.3Y consisted I-phase (Mg3YZn6); alloy ZM31+3.2Y contained I-phase and W-phase (Mg3Y2Zn3); alloy ZM31+6Y had long-period stacking-ordered (LPSO) X-phase (Mg12YZn) and Mg24Y5 particles. With increasing Y content the basal texture became weakened significantly. While alloys ZM31+0.3Y and ZM31+3.2Y exhibited a skewed true stress-true stain curve with a three-stage strain hardening feature caused by the occurrence of {10 Ī 2} extension twinning, the true stress-true strain curve of alloy ZM31+6Y was normal due to the dislocation slip during compression. The evolution of flow stress, texture and microstructure during the compression tests has been studied under various conditions of temperature and strain rates. Optical metallography, EBSD techniques and X-ray diffraction were employed to study the microstructural development and texture evolution. The deformation activation energy was calculated and the processing maps were generated to determine the optimum hot working parameters. In addition, viscoplastic selfconsistent model was successfully used to predict the experimental textures. Lastly, the strengthening mechanisms in each Mg-Zn-Mn-Y material are established quantitatively for the first time to account for grain refinement, thermal mismatch, dislocation density, load bearing, and particle strengthening contributions. The present work laid the foundations for a better understanding the role of Y elements on deformation behavior in magnesium alloys.

Effects of Y on the Deformation Mechanisms of Extruded Mg-Y Sheets During Room-Temperature Compression

Deformation mechanisms of basal slip, twinning and non-basal slips in Mg–Y alloy by micropillar compression

Effect of yttrium addition on dynamic mechanical properties, microstructure, and fracture behavior of extrusion-shear ZC61 + xY (x = 0, 1, 2, 3) alloys

Effects of Y on Microstructure and Mechanical Properties of Extruded Mg-5Al-1Ca Magnesium Alloys

Critical resolved shear stresses for slip and twinning in Mg-Y-Ca alloys and their effect on the ductility

Role of Y on the microstructure and mechanical properties of Mg-Gd-Zr alloy

Quantitative Investigation on the Slip/Twinning Activity and Cracking Behavior During Low-Cycle Fatigue of an Extruded Mg-3Y Sheet

Texture development and tensile properties of Mg–Yb binary alloys during hot extrusion and subsequent annealing

Simulation on Microstructure Evolution and Mechanical Properties of Mg−Y Alloys: Effect of Trace Y

The deformation modes and transferability during low-cycle fatigue of Mg and Mg–3Y alloy

Influence of Yttrium Addition on Texture and Deformation Behavior in an Extruded ZM31 Alloy

Effect of Y content on the microstructure and mechanical anisotropy of Mg–6Zn-xY-0.5Ce-0.4Zr alloy subjected to asymmetric rolling

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Effect of Y content on microstructure evolution and tensile properties of Mg-8Li-3Al-2Sn-xY alloys

Double-peak Strain Hardening Behavior of Mg–1.2 wt.%Y Alloy

Anisotropic cyclic deformation behavior of an extruded Mg-3Y alloy sheet with rare earth texture

Effects of extrusion ratio and temperature on the microstructure and mechanical properties of Mg–Zn–Yb–Zr extrusion alloys

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

Deformation mechanism of fine grained Mg–7Gd–5Y–1.2Nd–0.5Zr alloy under high temperature and high strain rates

Quantitative investigation on the {10–12} twinning-detwinning behavior and twinning transfer of an extruded Mg-2.8Y sheet during compression-tension loading via quasi-in-situ EBSD observation

Role of micro-alloying element in dynamic deformation of Mg-Y alloys