Abstract:A k-epsilon-Theta-k(p) model was proposed to describe the complicated two-phase flow in downers, taking into account the fast and dense gas-solid flows in downers, transport phenomena caused by turbulence mechanism and collisions between particles, i.e., a k-epsilon turbulence model for gas phase, a k(p) turbulence model, and a kinetic theory description of solid stresses characterized by pseudo-temperature of particles (Theta) for solid phase. A FORTRAN code was developed to solve the steady-state 3D flow fields of two-phase flows numerically. To validate the reliability of the k-epsilon-Theta-k(p) model, the gas-solid flows in (1) the developing and fully developed regions of a downer (140 mm ID) and (2) solids jet development in the entrance region of a downer (92 mm ID) were simulated. The predicted results had satisfactory agreement with a large quantity of experimental data, i.e., axial and radial distributions of local solids fraction, local particle velocity, and pressure. In particular, the above model and corresponding simulations were also implemented successfully using CFX 4.2/4.3, a commercial software developed by AEA Technology Company. Furthermore, the CFX code was applied to predict the radial flow structure in a downer of 418 mm ID, which was validated by the ongoing experiments in the corresponding experimental setup. Further analysis of the simulated data also showed that the diffusion coefficient of particles is strongly correlated with the local solids fraction. A lower solids fraction corresponds to a larger radial diffusion coefficient. With the increase of solids fraction, the diffusion coefficient decreases sharply when the solids fraction is less than 0.05, and then levels off. This means that the local solids fraction has an important effect on the dispersion behavior of particles. This predicted result gives reasonable agreement with the experimental results in the literature.

Determining Axial Dispersion Coefficients of Pilot-Scale Annular Pulsed Disc and Doughnut Columns

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

3D-CFD Simulation of Liquid–Liquid Two-Phase Flow in A Pilot-Plant Scale Annular Pulsed Disc and Doughnut Column

CFD Simulation of Liquid–Liquid Two-Phase Hydrodynamics and Axial Dispersion Analysis for a Non-Pulsed Disc and Doughnut Solvent Extraction Column

Effect of hydrodynamic heterogeneity on particle dispersion in a Taylor-Couette flow reactor with variable configurations of inner cylinder

Scale-Up Study on the Performance of Annular Pulsed Disc-And-Doughnut Columns

Axial Mixing and Mass Transfer Performance of an Annular Pulsed Disc-And-Doughnut Column

Lateral dispersion coefficient of large solid particles in CFB dense zone using CPFD method

Augmented CFD–PBM Simulation of Liquid–Liquid Two-Phase Flows in Liquid Extraction Columns with Wettable Internal Plates

CFD Simulation of Two-Phase Flow in a Hybrid Pulsed Sieve-Plate Solvent Extraction Column: Prediction of Holdup and Axial-dispersion Coefficients

CFD simulation of hydrodynamics in downer reactors

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Estimation of Axial Dispersion in Pulsed-Plate Extraction Columns

Hydraulic Performance of an Annular Pulsed Disc-and-Doughnut Column

Experimental studies of dispersed phase axial dispersion in pulsed sieve plate columns

Determination of Axial Diffusivity in Oscillatory Tube Flows

Axial Mixing and Mass Transfer Characteristics of Pulsed Extraction Column with Discs and Doughnuts

Prediction of Solids Dispersion Coefficient in Fluidized Bed Dense Zone Using CFD Simulation

CFD modeling of double-partition divided-wall column for mass transfer characteristics

Efficient estimation of axial mixing distribution for extraction in rotating disc contactor based on simulation using mean age theory

Use of Computational Fluid Dynamics (CFD) Dispersion Parameters in the Development of a New DPI Actuated with Low Air Volumes