Abstract:The geometry and mechanical behavior of concrete bridge towers are complex. Hence, it is important to generate a rational mechanical analysis model for structural design. The method of strut‐and‐tie models (STMs) is an effective way to analyze disturbed regions (D‐regions) such as the anchorage zones of cables in bridge towers. This paper provides a detailed analysis of the elastic stress distribution on the bridge tower of a cable‐stayed bridge with two cable planes. The vertical component of the stay cable force was considered for the analysis. Additionally, two different STMs of the bridge tower were developed with the load path method using different horizontal spacings of the stay cables. Based on the minimum energy principle, the optimal STMs of the two different STMs were generated. A detailed calculation method for the configuration of the optimal STMs is presented. In the paper, computational expressions of the internal force for the tie members in the two STMs are also proposed. Overall, this study demonstrated the strong applicability of the proposed STMs for a bridge tower in a cable‐stayed bridge with two cable planes. This can be considered an effective simplified method in the structural design of bridge towers. Furthermore, the study established that the influence of the horizontal distance between stay cables on the mechanical response‐behavior of the structure should be considered in the design of concrete bridge towers.

Development of Strut-and-Tie Models Using Load Path in Structural Concrete

Strut-And-Tie Model Research On Bridge Column-Pile-Footing

Strut-and-tie Model Method for Design of Reinforced Concrete Structures:Part Ⅰ Model Development

Load-Path Method for Design of Disturbed Regions in Concrete Structures

Development of Strut‐and‐tie Models Using Topology Optimization Based on Modified Optimal Criterion

Elastic-to-Plastic Strut-and-Tie Model for Concentric Anchorage Zones

Elastic-to-Plastic Strut-and-Tie Model for Deep Beams

Review of application and research of strut-and-tie models for concrete bridges

Investigation of Optimal Layout of Ties in Stm Developed by Topology Optimization

Application of Strut-and-Tie Method for Railway Reinforced Concrete Structure

Strut-and-tie model of simply supported beams under different prestressing degree

Strut-and-tie Model Method for Design of Reinforced Concrete Structures-Part Ⅱ:design

Application of Strut Model on Steel Spatial Structure

Full-range Nonlinear Analysis of Post-Tensioned Anchorage Zones Based on Modified Strut-and-tie Model

Strut-and-Tie Model for Design of Diaphragms in Concrete Girder Bridges

STRUT AND TIE MODEL OF ANCHORAGE ZONE BASED ON MULTI-NODE MICRO TRUSS ELEMENT

Strut-and-tie Model of Deep Beam Design Subjected to Two Movable Loads

Strut-and-tie Model of Deep Beam Design Under Uniform Distributed Loads

Application of strut-and-tie model for design of interior anchorage zone in post-tensioned concrete structure

Investigation of the strut‐and‐tie model of a two‐plane cable‐stayed bridge tower under vertical component of the cable force

Design and assessment of concrete structures with strut‐and‐tie models and stress fields: From simple calculations to detailed numerical analysis