Abstract:Modified two-surface model (M2SM) is one of the steel elasto-plastic hysteretic constitutive models that consider both analysis accuracy and efficiency. However, when M2SM is used for complex strain history, sometimes the results are irrational due to the limitation of stress-strain path judgment. In this paper, the defect of M2SM was re-modified by improving the judgment of stress-strain paths. The accuracy and applicability of the improved method were verified on both material and structural level. Based on this improvement, the nonlinear time-history analysis was carried out for a deck-through steel arch bridge with a 200 m-long span under the ground motions of Chi-Chi earthquake and Niigata earthquake. In the analysis, we compared the results obtained by hysteretic constitutive models of improved two-surface model (I2SM) presented in this paper, M2SM and the bilinear kinematic hardening model (BKHM). Results show that, although the analysis precision of displacement response of different steel hysteretic models differs little from each other, the stress-strain responses of the structure are affected by steel hysteretic models apparently. The difference between the stress- strain responses obtained by I2SM and M2SM cannot be neglected. In significantly damaged areas, BKHM gives smaller stress result and obviously different strain response compared with I2SM and M2SM, and tends to overestimate the effect of hysteretic energy dissipation. Moreover, at some position with severe damage, BKHM may underestimate the size of seismic damaged areas. Different steel hysteretic models also have influences on structural damage evaluation results based on deformation behavior and low cycle fatigue, and may lead to completely different judgment of failure, especially in severely damaged areas.

Application of Strut Model on Steel Spatial Structure

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Circumferential Folded Single-Layer Reticulated Spherical Shell and Simplified Calculation Method in Structure Static Analysis

Effect of Hysteretic Constitutive Models on Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridges

Mechanical Analysis of a Type of Hybrid Spatial Structure Composed of Cables, Bars and Beams

The model experimental research on rib-patterned large-span spatial cable-truss tensile structure with annular plane

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Structural spatial analysis method of prestressed concrete box girder with corrugated steel webs

New Advances In Theory Of Stability Of Steel Structures

LOAD-CARRYING CAPACITY OF SINGLE ANGLE STRUTS CONNECTED WITH ONE LEG

Analytical Model for Steel Frame-Reinforced Concrete Infill Slit Wall System

Strut-And-Tie Model Research On Bridge Column-Pile-Footing

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Numerical modelling and equivalent brace model of cold-formed steel buckling-restrained steel plate shear walls

Modeling and Finite Analysis of Overall Structure Mechanical Behavior of Steel Frame—Cold-formed Thin-walled Steel Composite Wall

NSF-Based Analysis of the Structural Stressing State of Trussed Steel and a Concrete Box Girder.

Innovative Technique for Strengthening Steel Frame Articulated Joints in Restricted Conditions

Experimental investigation of integral scaled model on load-carrying capacity of main stadium of Shenzhen Universiade Sport Center

Study on Seismic Behaviour of Cold Formed Steel Structure Based on Simplified Mechanical Model

NUMEIUCAL STUDY ON STABILITY BEHAVIOR AND FAILURE MECHANISM OF STEEL TUBE TRUSS-ARCHES

Design and Model Test of a Modularized Prefabricated Steel Frame Structure with Inclined Braces