Abstract:A green, simple, and scalable upcycling strategy is shown that not only effectively regenerates degraded NCM material (LiNi0.6Co0.2Mn0.2O2 as a model system) but also decorates the material with a uniform Li4Ti5O12 coating. Lithium‐ion batteries (LIBs) with ternary oxide cathode materials are the prevalent energy storage devices for electric vehicles, and the huge amounts of spent LIBs pose severe challenges in terms of environmental impact and resource management. Particularly, the proper handling of degraded cathode materials is of central importance for the sustainable and closed‐loop development of LIBs industry. In this context, direct regeneration of degraded ternary oxides toward reusable high‐performance cathode materials is environmentally and economically favorable in contrast to present metallurgical recycling methods. In this work, a simple and effective two‐step method is demonstrated to regenerate the degraded NCM 622 (LiNi0.6Co0.2Mn0.2O2) materials by elemental compensation and structural restoration. Moreover, a multi‐functional LTO (Li4Ti5O12) surface coating is simultaneously designed to guarantee rapid Li+ diffusion and stable surface of the regenerated product. Therefore, the regenerated LTO‐coated NCM materials show excellent electrochemical performance; specifically, the initial discharge capacity (183.0 mAh g−1 at 0.1 C), rate capability (90.0 mAh g−1 at 10 C), and cycling stability (79.3% capacity retention after 200 cycles) are even comparable with those of fresh materials. The as‐established upcycling strategy may shed light on the value‐added recycling of degraded cathode materials and thereby a virtuous cycle of LIBs.

Regeneration of degraded LiNi 0.5 Co 0.2 Mn 0.3 O 2 from spent lithium ion batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Regeneration of Al-doped LiNi1/3Co1/3Mn1/3O2 cathode material via a sustainable method from spent Li-ion batteries

Nondestructive Electrochemical Capacity Restoration of LiNi1/3Co1/3Mn1/3O2 Cathode for Lithium Batteries

Multiscale Observations on Mechanisms for Direct Regeneration of Degraded NCM Cathode Materials

A regeneration strategy based on synchronous utilization in surface impurities of degradation nickel-rich material

Revealing Lithium Configuration in Aged Layered Oxides for Effective Regeneration

Restoring Surface Defect Crystal of Li-Lacking LiNi 0.6 Co 0.2 Mn 0.2 O 2 Material Particles toward More Efficient Recycling of Lithium-Ion Batteries

Effective Upcycling of Degraded NCM Cathode Materials Assisted by Surface Engineering for High‐Performance Lithium‐Ion Batteries

The regeneration and electrochemical performance study of NCM622 cathode materials

Boosting efficient and low-energy solid phase regeneration for single crystal LiNi0.6Co0.2Mn0.2O2 via highly selective leaching and its industrial application

Self‐Reconstruction of Highly Degraded LiNi0.8Co0.1Mn0.1O2 Towards Stable Single‐Crystalline Cathode

Regeneration of Al-doped LiNi0.5Co0.2Mn0.3O2 cathode material by simulated hydrometallurgy leachate of spent lithium-ion batteries

Preparation and Performance of Regenerated Al2O3-Coated Cathode Material LiNi0.8Co0.15Al0.05O2 from Spent Power Lithium-Ion Batteries

High reversibility of layered oxide cathode enabled by direct Re-generation

A Simple Method for the Complete Performance Recovery of Degraded Ni-rich LiNi0.70Co0.15Mn0.15O2 Cathode Via Surface Reconstruction

A green, efficient, closed-loop direct regeneration technology for reconstructing of the LiNi0.5Co0.2Mn0.3O2 cathode material from spent lithium-ion batteries

Rejuvenating LiNi0.5Co0.2Mn0.3O2 cathode directly from battery scraps

Regenerated Ni-Doped LiCoO 2 from Spent Lithium-Ion Batteries as a Stable Cathode at 4.5 V

Novel Recycling Approach to Regenerate a LiNi0.6Co0.2Mn0.2O2 Cathode Material from Spent Lithium-Ion Batteries

Direct Regeneration of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode from Spent Lithium-Ion Batteries by the Molten Salts Method