Abstract:We have designed, optimized, fabricated and characterized highly reflective quasi-omnidirectional (angular range of $0-60^\circ$) multilayered structures with a wide spectral range. Two techniques, chirping (a continuous change in thicknesses) and stacking of Bragg-type sub-structures, have been used to enhance the reflectance with minimum thickness for a given pair of refractive indices. Numerical calculations were carried out employing the transfer matrix method and we optimized the design parameters to obtain maximal reflectance averaged over different spectral ranges for all angles. We fabricated some of the optimized structures with porous silicon dielectric multilayers with low refractive contrast and compared their measured optical properties with the calculations. Two chirped structures with thicknesses 21.6 $\mu$m and 60.4 $\mu$m, resulting in quasi omnidirectional mirrors with bandwidths of 360 nm and 1800 nm, centered at 1160 nm and 1925 nm respectively have been shown. In addition, we fabricated a stacked sub-Bragg mirror structure with a quasi omnidirectional bandwidth of 1800 nm (centered at 1850 nm) and a thickness of 41.5 $\mu$m, which is almost two third (in thickness) of the chirped structure. Thus, our techniques allowed us to obtain relatively thin quasi-omnidirectional mirrors with wide bands over different wavelength ranges. Our analysis techniques can be used for the optimization of the reflectance not only in multilayered PS systems with different refractive index contrasts but also for systems with other types of materials with low refractive index contrast. The present study could also be useful for obtaining omnidirectional dielectric mirrors in large spectral regions using different materials, flat focusing reflectors, thermal regulators, or, if defects are included, as filters or remote chemical/biosensors with a wide angular independent response.

Nanostructured Antireflection Micro-Optics in the Optical Fiber Communication Band

Recent Progress in Optical Micro/Nanofiber Technology

Optical microfibers and their applications

Brief Introduction to Optical Microfibers and Nanofibers

Glass Nanofibers for Micro- and Nano-Scale Photonic Devices

Wide-angle Broadband Antireflection with Nano-taper Hydrated Alumina Film

Microfiber and Nanofiber Optics: Principles and Applications

Tuning the peak position of subwavelength silica nanosphere broadband antireflection coatings.

Tunable MEMS-based metamaterial nanograting coupler for C-band optical communication application

Characterization of anti-reflection structures fabricated via laser micro/nano-processing

Optimization of wide-band quasi-omnidirectional 1-D photonic structures

Integrated Nanophotonic Devices for Optical Interconnections

Design of the wideband anti-reflective subwavelength nanostructures

The optical applications of 3D sub-wavelength block-copolymer nanostructured functional materials

Broadband High-Performance Infrared Antireflection Nanowires Facilely Grown on Ultrafast Laser Structured Cu Surface.

Tunable Antireflection Properties with Self-Assembled Nanopillar and Nanohole Structure

Nanostructure optic-fiber-based devices for optical signal processing

Antireflection Coatings Based on Subwavelength Artificial Engineering Microstructures

Fabrication of Anti-reflecting Si Nano-structures with Low Aspect Ratio by Nano-sphere Lithography Technique

Nanomechanical Optical Fiber.

Broad-Band Ultra-Low-Reflectivity Multiscale Micro-Nano Structures by the Combination of Femtosecond Laser Ablation and in Situ Deposition