Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

A Multi-Slice VCO-based Quantizer for On-Chip Power Supply Noise Analysis Achieving 0.11 (mV)<sup>2</sup>/sqrt(MHz) Noise Floor

An On-Chip Power-Supply Noise Analyzer with Compressed Sensing and Enhanced Quantization.

Design of Analog Circuits in Multi-Bit Quantized Audio DAC

25.4 A Scalable 20ghz On-Die Power-Supply Noise Analyzer with Compressed Sensing

An Ultra-Low-Voltage High-Performance VCO in 0.13 μm CMOS

Power And Jitter Optimized Vco Design Using An On-Chip Supply Noise Monitoring Circuit

A 1.2 mW 67.5 dB SQDR VCO-based ΣΔ ADC with Non-linearity Cancellation Technique

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

A Sub Mw Low Flicker Noise Cryo-CMOS QVCO for Quantum Computing Application

Phase Noise Analysis In Cmos Lc Quadrature Vco

High Performance QVCO Design with Series Coupling in CMOS Technology

A Low Power Small Area Multi-Bit Quantizer with A Capacitor String in Sigma-Delta Modulator

A 174.3-Db FoM VCO-Based CT $\delta \sigma $ Modulator with a Fully-Digital Phase Extended Quantizer and Tri-Level Resistor DAC in 130-Nm CMOS

A low-voltage low-phase-noise bottom-series LC QVCO using capacitor tapping technique

A 15Mhz-Bw 82.7Db-Sndr 98.8Db-Sfdr Pipelined MASH 2–2 CT DSM in 65nm CMOS

An 8.2 GHz triple coupling low-phase-noise class-F QVCO in 65nm CMOS.

A 63–89-Khz 1/ $f^{3}$ Phase Noise Corner QVCO Using Enhanced Wideband-Harmonic-Shaping Technique

A 70db SNDR 20Mhz-Bw VCO-Based CT Sturdy MASH Delta-Sigma Modulator with Robust Quantization Error Extraction

Analysis and design of a new low‐phase noise and Gm‐enhanced class‐C quadrature VCO

A Low-Phase-Noise Lc Qvco With Bottom-Series Coupling And Capacitor Tapping

Ultra-low Power MOSFET-only Micromation Multi-Bit Quantizer for Implantable Neural Applications