Abstract:For small aspherical molds, it is difficult for the existing polishing method to take into account the correction of the surface error and the control of the uniformity of the surface roughness (SR) distribution, because the polishing tool is always larger than the small mold. Therefore, we used viscoelastic polyester fiber cloth to wrap the small steel ball as a polishing tool to adapt to the surface shape change of the aspherical mold, and designed a semi-flexible small polishing disc tool with microstructure, which can better adapt to the curvature change of aspherical surface and obtain better SR Ra. At the same time, a combined polishing method of constant speed and variable speed for screw feed was proposed to improve the uniformity of SR distribution in the paper. Then, a series of theoretical analysis and experimental verification were carried out in this paper to predict the tool influence function (TIF) of the two polishing tools and the effectiveness of the combined polishing method. In the experiment, a TIF bandwidth of about 0.46 mm was obtained with a small spherical polishing tool, which favors the surface shape correction of the small aspherical mold. The experiment of uniform removal with a small polishing disc tool was carried out to quickly reduce the Ra. Finally, the surface quality of the aspherical mold was effectively improved, combined with the constant speed and variable speed polishing modes of screw feed of the small spherical polishing tool and the smoothing effect of the small polishing disc tool. The peak valley (PV) of two small aspherical molds with an optical effective diameter less than 13 mm converged from 0.3572 μm and 0.2075 μm to 0.1282 μm and 0.071 μm, respectively. At the same time, the SR dispersion coefficient was reduced from 27.9% and 41.6% to 14.2% and 12.7%, respectively. The study provides a good solution for the surface quality control of small aspherical molds.

Pseudo-random Path Generation Algorithms and Strategies for the Surface Quality Improvement of Optical Aspherical Components.

Development of Ultra-Precision Grinding Process for Aspheric Surface Based on Feed Rate Controlling and Error Compensation Methods

Algorithms for Constructing Initial and Offset Path of Automated Fiber Placement for Complex Double-Curved Surfaces

Representation of Complex Optical Surfaces with Adaptive Radial Basis Functions

Optimal strategy for fabrication of large aperture aspheric surfaces

Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces

Review on Surface Polishing Methods of Optical Parts

Optical Surface Generation in Ultra-Precision Polishing of Freeform

Optimization of Tool Path for Uniform Scallop-Height in Ultra-precision Grinding of Free-form Surfaces

Integration of Metrology in Grinding and Polishing Processes for Rotationally Symmetrical Aspherical Surfaces with Optimized Material Removal Functions

Distance-based generation of a unicursal random path on a non-grid point set for optical polishing

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

Tilt angle correction based forming algorithm for high steepness aspheric surfaces polishing

Toward the Accurate Coverage of Aspheric Surfaces Using Two-Dimensional Scanning Paths for Minimizing Regular Errors

Statistical perception of the chaotic fabrication error and the self-adaptive processing decision in ultra-precision optical polishing

Surface Testing Methods of Aspheric Optical Elements

A New Aspheric Surfaces Polishing by Parallel Orthogonality Movement/Force Servomechanism

Surface profile prediction modeling of spiral toolpath for axial ultrasonic vibration-assisted polishing

Sub-regional polishing and machining trajectory selection of complex surface based on K9 optical glass

Surface Quality Control Strategy of Aspherical Mold Based on Screw Feed Polishing of Small Polishing Tool