Abstract:The paper presents the design of a six-axis machining system and its application in fabricating large off-axis aspherical mirrors with sub-aperture lapping techniques. The new system is based on computer-controlled optical surfacing (CCOS), which combines the faculties of grinding, polishing, and on-machine profile measuring, has the features of conventional loose abrasive machining with the characteristics of a tool having multiple degrees of freedom moving in planar model. And a novel dual touch-trigger probe profiler is designed, which is composed of a probe, model METRO-MT60 made by HEIDENHAIN Co., is integrated into the system for measuring the shape accuracy of the tested aspherical surface, another probe modeled METRO-MT12 is designed as a calibrating device for minimizing the cosine error caused by assembly inaccuracy. The new CNC machining system with two kinds of moving coordinate systems, dual tool activities and on-machine measuring is presently developed based on the new concept. The general material removal function during machining is analyzed on the basis of the Preston hypothesis. Further, an alignment test of the measuring profiler is carried out using a leveling rule as a specimen. The accuracy of the optical surfaces measured by the dual probe profiler is found to be within 1μm PV after removing cosine error and error compensating, achieves to the resolving power of the profiler is about 0.2–0.5μm, so the developed system can be applied to the shape accuracy measuring of aspheric fabrication with micro precision during fine grinding process according to the calibrating results. Finally, the manufacturing experiments are carried out by virtue of an off-axis oblate ellipsoid mirror with rectangular aperture as 770mm×210mm and centered 127mm. The accuracy of the aspherical mirror improved from the initial form error of 17.648μmrms to the final one of 0.728μmrms after grinding for 200h.

Toward the Accurate Coverage of Aspheric Surfaces Using Two-Dimensional Scanning Paths for Minimizing Regular Errors

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Research on the Optimized Tool-Path Planning of Computer Controlled Optical Surfacing

An accurate surface error optimization for five-axis machining of freeform surfaces

Modelling and Simulation of Mid-Spatial-frequency Error Generation in CCOS

Tool path generation for multi-axis freeform surface finishing with the LKH TSP solver

Optimization of Removal Function Parameters in CCOS

Optimized Strategy to Restrain the Mid-Spatial-frequency Surface Error in Computer-Controlled Optical Surfacing

Development of multi-pitch tool path in computer-controlled optical surfacing processes

Tool Path Generation of Ultra-Precision Machining an Off-Axial Four-Mirror Anastigmat System Based on Accuracy Active Control

Tool path optimal design for slow tool servo turning of complex optical surface

A Mid-High Spatial Frequency Error Suppression Method Based on the Pseudo-Random Path with Space MABF Mapping for Complex Surface

Optimal strategy for fabrication of large aperture aspheric surfaces

Frequency-domain analysis of computer-controlled optical surfacing processes

Design of a six-axis high precision machine tool and its application in machining aspherical optical mirrors

Integration of Metrology in Grinding and Polishing Processes for Rotationally Symmetrical Aspherical Surfaces with Optimized Material Removal Functions

Influence and suppression of periodic contour error of tool path and velocity deviations on surface error

Mapping Error Correction of Large Off-Axis Aspheric Surface in Null Test

Distortion of Removal Function Based on the Local Asphericity of Aspheric Surface and the Viscoelasticity of Polishing Tool in Computer-Controlled Optical Surfacing

A New Analytical Path-Reshaping Model and Solution Algorithm for Contour Error Pre-Compensation in Multi-Axis Computer Numerical Control Machining

Off-Axis Aspheric Surfacing Using Sub-Aperture Tools