Abstract:The thermophysical properties of Ni-based single-crystal superalloys were investigated using first-principles calculations combined with the quasiharmonic approximation. The effect of alloying elements X (X = Re, Ru, Ta, W, Mo, Cr, and Co) on the thermophysical properties of the γ-Ni and γ'-Ni3Al phases was investigated. The calculations showed that alloying can effectively adjust the lattice misfit between the two phases, and Cr can suppress lattice misfit and may improve the creep resistance of alloys. At 0 K, doping with refractory elements leads to tetragonal shear softening of the γ-Ni phase. For γ-Ni, Re, Ru, Cr, and Co slightly increase c44, while Mo, W, and Ta decrease c44. Importantly, high-temperature relative hardening was found to occur close to the service temperature of the superalloy, at which Ru and Cr increase c' and Mo and W increase c44 of γ-Ni. For the γ'-Ni3Al phase, all of the alloying elements except Co considerably increase c' and c44. Re and W at the Al site were found to most effectively harden the γ'-Ni3Al phase. The thermophysical and elastic properties were fully understood by analysis of the electronic structures and phonon spectra. It was found that the electronic density of states (DOS) can account for elastic hardening due to alloying. The phonon spectra along with electronic DOS analysis showed that alloying not only strengthens the first nearest neighbor Ni-X bond through additional d-d hybridization, but it is also important for stiffening the second nearest neighbor Al-X bonding through p-band filling.

First-principles Study of Ni/Ni3Al Interface Doped with Re, Ta and W

First-principles Study of Ni/Ni3Al Interface Strengthening by Alloying Elements

First-principles investigation of the alloying effect of refractory elements Ta and W in the misfit dislocation core of γ/γ′ (0 0 1) interface

Effect of Alloying Elements on Lattice Misfit and Elasticities of Ni-based Single Crystal Superalloys by First-Principle Calculations

Density Functional Theory Study of Ni/Ni3Al Interface Alloying with Re and Ru

Influence of the alloying elements Re, Co and W on the propagation of the Ni/Ni3Al interface crack

Energetics And Electronic Structure Of Re And Ta In The Gamma ' Phase Of Ni-Based Superalloys

Density functional theory study of the thermodynamic and elastic properties of Ni-based superalloys

The alloying mechanisms of Re, Ru in the quaternary Ni-based superalloys γ/γ′ interface: A first principles calculation

Effect of Re and W upon brittle fracture in Ni3Al cracks by atomic simulation

Influence of Alloying Elements Upon the Theoretical Tensile Strength of Ni-based Model Superalloy: Γ-Ni/γ′-ni3al Multilayer

The Effect of Ta, W, and Re Additions on the Tensile-Deformation Behavior of Model Ni-based Single-Crystal Superalloys at Intermediate Temperature

Effects of alloying elements on the super-lattice intrinsic stacking fault energy and ideal shear strength of Ni 3 Al crystals

First-principles studies on bonding mechanism at Ni/X bimetallic interfaces (X=Ta, W, Re and Ru)

Effect of alloying element on dislocation cross-slip in gamma '-Ni3Al: a first-principles study

Understanding alloying behaviors of Sc, Ni and Zn additions on Al/TiB2 interfaces based on interfacial characteristics and solute properties

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

The Effects of Alloying Elements on Generalized Stacking Fault Energies, Strength and Ductility of Gamma '-Ni3al

The First-Principles Study on the Doping Effect of Re in Ni3Al

Insight into γ-Ni/γ′-Ni3Al interfacial energy affected by alloying elements

Re effects in model Ni-based superalloys investigated with first-principles calculations and atom probe tomography*