Abstract:The thermophysical properties of Ni-based single-crystal superalloys were investigated using first-principles calculations combined with the quasiharmonic approximation. The effect of alloying elements X (X = Re, Ru, Ta, W, Mo, Cr, and Co) on the thermophysical properties of the γ-Ni and γ'-Ni3Al phases was investigated. The calculations showed that alloying can effectively adjust the lattice misfit between the two phases, and Cr can suppress lattice misfit and may improve the creep resistance of alloys. At 0 K, doping with refractory elements leads to tetragonal shear softening of the γ-Ni phase. For γ-Ni, Re, Ru, Cr, and Co slightly increase c44, while Mo, W, and Ta decrease c44. Importantly, high-temperature relative hardening was found to occur close to the service temperature of the superalloy, at which Ru and Cr increase c' and Mo and W increase c44 of γ-Ni. For the γ'-Ni3Al phase, all of the alloying elements except Co considerably increase c' and c44. Re and W at the Al site were found to most effectively harden the γ'-Ni3Al phase. The thermophysical and elastic properties were fully understood by analysis of the electronic structures and phonon spectra. It was found that the electronic density of states (DOS) can account for elastic hardening due to alloying. The phonon spectra along with electronic DOS analysis showed that alloying not only strengthens the first nearest neighbor Ni-X bond through additional d-d hybridization, but it is also important for stiffening the second nearest neighbor Al-X bonding through p-band filling.

First-principles Study of Ni/Ni3Al Interface Strengthening by Alloying Elements

First-principles Study of Ni/Ni3Al Interface Doped with Re, Ta and W

The Strengthening Effects and Mechanisms of Alloying Elements on Interfaces for Multiphase Ni-based Superalloys: A First-Principles Study

Effect of Alloying Elements on Lattice Misfit and Elasticities of Ni-based Single Crystal Superalloys by First-Principle Calculations

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Influence of the alloying elements Re, Co and W on the propagation of the Ni/Ni3Al interface crack

Density Functional Theory Study of Ni/Ni3Al Interface Alloying with Re and Ru

Density functional theory study of the thermodynamic and elastic properties of Ni-based superalloys

Influence of Alloying Elements Upon the Theoretical Tensile Strength of Ni-based Model Superalloy: Γ-Ni/γ′-ni3al Multilayer

Effects of alloying elements on the Ni/Ni<sub>3</sub>Al interface strength and vacancy diffusion behavior

Effect of alloying elements on stacking fault energies of γ and γʹ phases in Ni-based superalloy calculated by first principles

Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys

Site preference and effect on shear deformation of co-alloying elements addition to γ′-Ni3Al phase in Ni-based single crystal superalloys

Effects of alloying elements on the super-lattice intrinsic stacking fault energy and ideal shear strength of Ni 3 Al crystals

Transition-metal Alloying of Γ′−ni3al : Effects on the Ideal Uniaxial Compressive Strength from First-Principles Calculations

Effects of alloying elements on the electronic structure and ductility of NiAl compounds investigated by X-ray absorption fine structure

First-principles investigation of the alloying effect of refractory elements Ta and W in the misfit dislocation core of γ/γ′ (0 0 1) interface

Insight into γ-Ni/γ′-Ni3Al interfacial energy affected by alloying elements

The alloying mechanisms of Re, Ru in the quaternary Ni-based superalloys γ/γ′ interface: A first principles calculation

Investigation on the effect of alloying elements on the Ti 2 AlC/TiAl interfacial properties: First-principles prediction and experimental verification

Strengthening enhanced by Ru partitioned to γ' phases in advanced Nickel-based single crystal superalloys