Abstract:Monitoring the corrosion of steel rebars is paramount to ensuring the safety and serviceability of reinforced concrete (RC) structures. Conventional electro-chemical techniques can provide an overall estimate of the extent of corrosion. However, a detailed account of the extent of corrosion would help in understanding the residual strength of corroding RC structures. A passive wave-based technique such as acoustic emissions can identify the location of corrosion but always requires the presence of transducers on the structure. In active wave-based techniques, the structure is excited through a pulse excitation and their subsequent response to this excitation is measured. Thus, for active techniques, the transducers need not always be present in the structure. In guided wave ultrasonics, the excitation pulse is imparted through a waveguide to determine the state of corrosion. This technique relies on parameters such as time of flight or attenuation of the incident signal to predict the state of corrosion. These parameters can be susceptible to uncertainties in the transducer of ultrasonic coupling. In the present study, concrete specimens with embedded steel bars have been subjected to accelerated corrosion. They have been monitored with a combination of active and passive techniques. The received signals are analyzed through a modified S-Transform-based time-frequency approach to obtain a range of modes that propagate through the specimen. The changes in the modal composition of the guided wave signals due to corrosion are parameterized and correlated to various stages of corrosion. A holistic understanding of the stages of corrosion is developed by the inclusion of acoustic emission hits to guided wave parameters. Based on the Guided Wave Ultrasonics and acoustic emission parameters, corrosion has been classified into Initiation, Intermediate, and Advanced. Subsequently, destructive tests have been performed to measure the residual strength of the corroded bars. Thus, this paper presents a novel proof of concept study for monitoring corrosion with Guided Wave Ultrasonics and acoustic emissions.

Combined Application of Novel Electromagnetic Sensors and Acoustic Emission Apparatus to Monitor Corrosion Process of Reinforced Bars in Concrete

Coupled application of innovative electromagnetic sensors and digital image correlation technique to monitor corrosion process of reinforced bars in concrete

Use of a Novel Electro-Magnetic Apparatus to Monitor Corrosion of Reinforced Bar in Concrete

Improved Magnetic-Based Apparatus Enables Non-Destructive and High Sensitive Steel-Bar Corrosion Detection

Multimodal Monitoring of Corrosion in Reinforced Concrete for Effective Lifecycle Management of Built Facilities

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Electrical Based Sensors and Remote Monitoring System for Assessing the Corrosion Related Activity in Concrete at Hangzhou Bay Bridge

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

THE STATE OF THE ART OF CONCRETE STRUCTURE DURABILITY MONITORING AND RESTORATION

An Optical Fiber Sensor Method for Simultaneously Monitoring Corrosion and Structural Strain Induced by Loading

Corrosion Mechanism of Reinforced Bars Inside Concrete and Relevant Monitoring or Detection Apparatus: A Review

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

Corrosion level estimation in reinforced concrete beams by acoustic emission sensing and selective crack measurements

In-situ Monitoring and Early Warning System for Durability of Concrete Structure of Hangzhou Bay Sea-crossing Bridge

Corrosion damage detection in reinforced concrete using Rayleigh wave-based method

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Acoustic Emission Analysis of Corroded Reinforced Concrete Columns under Compressive Loading.

Acoustic Emission Study on the Damage Evolution of a Corroded Reinforced Concrete Column under Axial Loads