Abstract:Cubic boron nitride (cBN) superabrasive grinding wheels exhibit unique advantages in the grinding of difficult-to-cut materials with high strength and toughness, such as titanium alloys and superalloys. However, grinding with multilayered metallic cBN superabrasive wheels faces problems in terms of grain wear resistance, the chip storage capability of the working layers and the stability and controllability of the dressing process. Therefore, in this work, novel metallic cBN superabrasive wheels with aggregated cBN (AcBN) grains and open pore structures were fabricated to improve machining efficiency and surface quality. Prior to the grinding trials, the air-borne abrasive blasting process was conducted and the abrasive blasting parameters were optimized in view of wear properties of cBN grains and metallic matrix materials. Subsequently, the comparative experiments were performed and then the variations in grinding force and force ratio, grinding temperature, tool wear morphology and ground surface quality of the multilayered AcBN grinding wheels were investigated during machining Ti–6Al–4V alloys. In consideration of the variations of grain erosion wear volume and material removal rate per unit of pure metallic matrix materials as the abrasive blasting parameters changes, the optimal abrasive blasting parameters were identified as the SiC abrasive mesh size of 60# and the abrasive blasting distance and time of 60 mm and 15 s, respectively. The as-developed AcBN grains exhibited better fracture toughness and impact resistance than monocrystalline cBN (McBN) grains because of the existence of metal-bonded materials amongst multiple cBN particles that decreased crack propagation inside whole grains. The metallic porous AcBN wheels had lower grinding forces and temperature and better ground surface quality than vitrified McBN wheels due to the constant layer-by-layer exposure of cBN particles in the working layer of the AcBN wheels.

The synergistic effect of nano Y<sub>2</sub>O<sub>3</sub>/CeO<sub>2</sub> and nano Al<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub> on the properties of vitrified bond and vitrified bond CBN composites

Effect of Y 2 O 3 on the properties of vitrified bond and vitrified diamond composites

Influence of TiO2 amount on the interfacial wettability and relevant properties of vitrified bond CBN composites

Sintering, microstructure, and mechanical properties of vitrified bond diamond composite

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Investigation on the Preparation of Vitrified Bond CBN Grinding Tools

Vitrified Metal Composite Bond for Diamond Grinding Tools Used for Silicon Carbide Wafer Thinning

Effects of nano-Al2O3 addition on microstructure, mechanical properties, and wear resistance of Ti(C, N)-based cermets

Effects of open pores on grinding performance of porous metal-bonded aggregated cBN wheels during grinding Ti–6Al–4V alloys

Exploring the Influences of BaO Amount on the Wettability and Mechanical Behavior of Vitrified Bond Diamond Composites

Sintering of Vitrified Bond CBN Grinding Tool

On the tribology and grinding performance of graphene-modified porous composite-bonded CBN wheel

Effects of micro/nano CeO2 on the microstructure and properties of WC-10Co cemented carbides

Effects of Ti Containing Cu-Based Alloy on Sintering Mechanism, Element Diffusion Behavior and Physical Properties of Glass-Ceramic Bond for Cubic Boron Nitride Abrasive Tool Materials

Controllable Preparation of Ceramic CBN Composites with Preferred Abrasive Orientation and Excellent Properties under Magnetic Fields

Research on the bonding properties of vitrified bonds with porous diamonds and the grinding performance of porous diamond abrasive tools

Grain erosion wear properties and grinding performance of porous aggregated cubic boron nitride abrasive wheels

Novel designed mechanical-mechanochemical synergistic micro-grinding technology and compounded abrasive micro-grinding tools

Fabrication and performance evaluation of metal bond diamond tools based on aluminothermic reaction

The Effect of Mono and Hybrid Additives of Ceramic Nanoparticles on the Tribological Behavior and Mechanical Characteristics of an Al-Based Composite Matrix Produced by Friction Stir Processing

Effects of nano-alumina on mechanical properties and wear resistance of WC-8Co cemented carbide by spark plasma sintering