Abstract:In this study, a powder metallurgy processing technique combined with rapid microwave sintering was used to synthesise carbon nanotubes (CNTs) filled AZ61 magnesium alloy composites under ambient conditions, without recourse to any secondary process. In order to determine the appropriate amount of CNTs for taking full advantage of the AZ61/CNTs composite, a powder mixture of the CNTs, in varying volume fractions of 1–3%, and the AZ61 alloy was prepared through a mechanical milling process. The optimized milling intensity allowed for reducing the powder size for effective microwave absorption, and thus improved the dispersion of the CNTs in the Mg alloy matrix without reducing the structural integrity of CNTs. In addition to the incorporation of the CNTs with the dual role of mechanical reinforcement and microwave susceptor, microwave sintering was achieved in only 8 min by using a synergetic combination of graphite and silicon carbide as microwave susceptors in a microwave furnace. The sintered samples, whose porosity ranged between 4 and 6%, were characterised for microstructural, hardness, compressive and fracture properties. The results of hardness and compression tests indicated that these properties of all the composites were significantly improved compared to the monolithic samples. The highest microhardness value (∼105% increment) was recorded for the composite with 3.0% volume fraction of CNTs, while the composite sample with 1.0% volume fraction of CNTs had the highest ultimate compressive yield strength and 0.2% offset yield strength with approximate increments of 59% and 127%, respectively. The failure mechanisms of the composites as compared with the monolithic samples were discussed.

Preparation and Characterization of High Damage-Tolerance Nacre-Inspired Magnesium Alloy Matrix Composites with High Carbon Nanotube Contents

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Microstructure, Interface and Strengthening Mechanism of Ni-CNTs/AZ91 Magnesium Matrix Composites

Mechanical properties and fabrication of carbon nanotubes reinforced AZ91D magnesium matrix nanocomposites

Fabrication of Carbon Nanotubes Reinforced AZ91D Composites by Ultrasonic Processing

Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

Strengthening Ni-Coated CNT/Mg Composites by Optimizing the CNT Content

On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix composites

Preparation of Structure-Function Integrated Layered CNT/Mg Composites

Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated by Thixomolding

Developing Fittingly Comprehensive Performance Carbon Nanotube/Mg-6Zn Sheets with Substantial Enhancement in Formability

Influence of Soft Phase and Carbon Nanotube Content on the Properties of Hierarchical AZ61 Matrix Composite with Isolated Soft Phase

Study on Properties of Carbon Nanotube/Magnesium Matrix Composite

Microstructures and Mechanical Properties of Carbon Tubes Reinforced AZ91D Magnesium Matrix Composites Prepared by Squeeze Casting

An improved approach to manufacture CNT reinforced magnesium AZ91 composites with increased strength and ductility

Rapid microwave sintering of carbon nanotube-filled AZ61 magnesium alloy composites

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

Magnesium Matrix Nanocomposites Fabricated by Ultrasonic Assisted Casting

CNT-induced heterogeneous matrix grain structure in CNTs/Al composites

Synergistic Strengthening of Mechanical Properties and Electromagnetic Interference Shielding Performance of Carbon Nanotubes (CNTs) Reinforced Magnesium Matrix Composites by CNTs Induced Laminated Structure