Abstract:A synergistic postmodification with CsBr and MABr is adopted to prepare stable CsPbI2Br at low temperatures. The C‐PeSC with the modified CsPbI2Br harvests a high PCE of 11.04%. Flexible PeSC maintains 90% of initial PCE during 150 bending cycles. The flexible device also exhibits excellent blue photo‐detection performances. This work provides a new avenue to explore flexible IHP in multifunctional devices. As an inorganic halide perovskite (IHP), CsPbI2Br has generated enormous publicity due to its suitable optical bandgap (≈1.92 eV) and thermal stability. Unfortunately, the terrible phase stability of CsPbI2Br film will cause a phase change in a wet environment and decelerate light response, seriously hindering the progression of IHP photovoltaics. Herein, a synergistic postmodification strategy with CsBr and MABr to achieve high‐quality CsPbI2Br film at a low‐temperature (≈150 °C) and positive perovskite/carbon interface is presented. Adding a small amount of MABr can promote the crystallization of perovskite. The evaporated CsBr accumulates on the grain boundaries and surface of CsPbI2Br and forms Br‐rich perovskite, which provides the protection of CsPbI2Br and segregation of water vapor. The carbon‐based perovskite solar cell (C‐PeSC) with the modified CsPbI2Br harvests a high power conversion efficiency (PCE) of 11.04%. Notably, the unpackaged cell maintains 81% of its original PCE after being stored for 21 days in an air atmosphere with 25–35% humidity. Flexible devices are further manufactured, whose PCE drops to 90% of the initial value during 150 bending cycles. The flexible device also exhibits excellent blue photodetection performances. The maximum responsivity and detection reach 0.68 A W−1 and 8.91 × 1012 Jones, respectively. These findings provide broader avenues for flexible IHP in multifunctional devices.

Low-temperature Interfacial Engineering for Flexible CsPbI2Br Perovskite Solar Cells with High Performance Beyond 15%

Low-temperature Preparation Achieving 10.95%-Efficiency of Hole-Free and Carbon-Based All-Inorganic CsPbI3 Perovskite Solar Cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%

Interfacial Energy Level Tuning for Efficient and Thermostable CsPbI2Br Perovskite Solar Cells

Low‐Temperature Crystallization of CsPbIBr 2 Perovskite for High Performance Solar Cells

Targeting the imperfections at the ZnO/CsPbI2Br interface for low-temperature carbon-based perovskite solar cells

Double Side Interfacial Optimization for Low-Temperature Stable CsPbI 2 Br Perovskite Solar Cells with High Efficiency Beyond 16%

Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability

Boosting the performance of low-temperature processed CsPbI2Br planar perovskite solar cells by interface engineering

A Facile Low Temperature Fabrication of High Performance CsPbI2Br All‐Inorganic Perovskite Solar Cells

Interface Engineering for All-Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%

Tailoring C60 for Efficient Inorganic CsPbI2 Br Perovskite Solar Cells and Modules

Low‐Temperature Stable CsPbI2Br Perovskite for Solar Photovoltaics and Blue Photodetection

Bifunctional interfacial engineering enabled efficient and stable carbon-based CsPbIBr2 perovskite solar cells

Interfacial Engineering for Efficient Low-Temperature Flexible Perovskite Solar Cells.

Bifunctional Passivation for Efficient and Stable Low-Temperature Processed All-Inorganic CsPbIBr2 Perovskite Solar Cells

Optimize the Oxide/Perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-inorganic CsPbI<sub>2</sub>Br Perovskite Solar Cells

Optimize the Oxide/Perovskite Heterojunction Contact for Low Temperature High Efficiency and Stable All-inorganic CsPbI<inf>2</inf>Br Perovskite Solar Cells

Constructing an Interfacial Gradient Heterostructure Enables Efficient CsPbI3 Perovskite Solar Cells and Printed Minimodules

High‐Efficiency Carbon‐Based CsPbIBr 2 Solar Cells with Interfacial Energy Loss Suppressed by a Thin Bulk‐Heterojunction Layer