Abstract:Fused filament fabrication (FFF) is a low-cost 3D printing technology that allows the production of components and structures with complex geometries, which cannot be achieved by traditional manufacturing processes. Nonetheless, this additive technique is not extensively used in high-value industrial sectors, mainly due to parts’ anisotropy related to deposition strategy and residual stresses caused by successive heating cycles. These features have a great influence on the mechanical performance of 3D-printed parts, in particular, thermoplastics with nonlinear behaviour (such as PLA or PA). Thus, engineering approaches to predict these elasto-plastic responses are demanded. In this work, the tensile and compression behaviours of FFF thermoplastics are investigated using a yield criterion that accounts, simultaneously, the presence of tensile and compressive loads applied on the material (a modified Hill yield criterion). The developed elasto-plastic algorithm, which uses the incremental-iterative Newton–Raphson method, is implemented within the formulation of a meshless method. Despite the use of the finite element method (FEM) for engineering applications have become widespread, new accurate and efficient discrete advanced numerical techniques—such as meshless methods (Belinha in Meshless methods in biomechanics: bone tissue remodelling analysis. Springer International Publishing, Porto, 2013 [1])—can handle the same kind of problems as the FEM and being, in some cases, even more efficient. To discretize the problem domain, meshless methods only require an unstructured nodal distribution. The numerical integration of the Galerkin weak form is performed using a background integration mesh, the nodal connectivity is enforced using the influence-domain concept and then the interpolation shape functions are obtained. In order to validate the numerical proposed algorithm, standardized tensile and compressive specimens were printed and tested. Then, using the material properties extracted from the experimental tests, a benchmark example was studied for the sake of model proof.

Implementation of an elastoplastic constitutive model for 3D-printed materials fabricated by stereolithography

Bond shear performances and constitutive model of interfaces between vertical and horizontal filaments of 3D printed concrete

Investigation on the Elasto-Plastic Constitutive Equation of Parts Fabricated by Fused Deposition Modeling

Orthotropic elastic behaviors and yield strength of fused deposition modeling materials: Theory and experiments

Elasto-Plastic Mechanical Modeling of Fused Deposition 3D Printing Materials

Isotropic and Anisotropic Elasticity and Yielding of 3D Printed Material

Micromechanical modeling and numerical homogenization calculation of effective stiffness of 3D printing PLA/CF composites

Thermomechanical Constitutive Behaviour of 3D Printed Biomimetic Polymer Material under High Strain Rates

A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations

Mechanical properties of 3D printed polylactic acid elements: Experimental and numerical insights

Experimental Validation of 3D Printed Material Behaviors and Their Influence on the Structural Topology Design

An Accurate Finite Element Approach for Programming 4D-Printed Self-Morphing Structures Produced by Fused Deposition Modeling

A three-dimensional elastoplastic constitutive model incorporating Lode angle dependence

Development of a Constitutive Model to Predict the Elasto-Plastic Behaviour of 3D-Printed Thermoplastics: A Meshless Formulation

Constitutive relation development for FDM 3D printing materials and simulation of printing direction combination

Mechanical characterization and constitutive modeling of additively-manufactured polymeric materials and lattice structures

DESIGN OF ELASTICALLY ISOTROPIC PLA LATTICE STRUCRURE IN FUSED FILAMENT FABRICATION CONSIDERING MATERIAL ANISOTROPY

Numerical simulation of three dimensional concrete printing based on a unified fluid and solid mechanics formulation

Experimental and numerical study of orthotropic behavior of 3D printed polylactic acid by material extrusion

Generalized models for unidirectional anisotropic properties of 3D printed polymers

A Constitutive Model for 3D Printed Continuous Fiber Reinforced Composite Structures with Variable Fiber Content