Abstract:Recently, increased attention has been given to the coupling of computational fluid dynamics (CFD) with the fuzzy logic control system for obtaining the optimum prediction of many complex engineering problems. The data provided to the fuzzy system can be obtained from the accurate computational fluid dynamics of such engineering problems. Windcatcher performance to achieve thermal comfort conditions in buildings, especially in hot climate regions, is considered as one such complex problem. Windcatchers can be used as natural ventilation and passive cooling systems in arid and windy regions in Saudi Arabia. Such systems can be considered as the optimum solution for energy-saving and obtaining thermal comfort in residential buildings in such regions. In the present paper, three-dimensional numerical simulations for a newly-developed windcatcher model have been performed using ANSYS FLUENT-14 software. The adopted numerical algorithm is first validated against previous experimental measurements for pressure coefficient distribution. Different turbulence models have been firstly applied in the numerical simulations, namely, standard k-epsilon model (1st and 2nd order), standard Wilcox k-omega model (1st and 2nd order), and SST k-omega model. In order to assess the accuracy of each turbulence model in obtaining the performance of the proposed model of the windcatcher system, it is found that the second order k-epsilon turbulence model gave the best results when compared with the previous experimental measurements. A new windcatcher internal design is proposed to enhance the ventilation performance. The fluid dynamics characteristics of the proposed model are presented, and the ventilation performance of the present model is estimated. The numerical velocity profiles showed good agreement with the experimental measurements for the turbulence model. The obtained results have shown that the second order k-epsilon turbulence can predict the different important parameters of the windcatcher model. Moreover, the coupling algorithm of CFD and the fuzzy system for obtaining the optimum operating parameters of the windcatcher design are described.

Low Cost and Energy Efficient Fuzzy Based Kitchen Ventilation Control System

An improved air quality and climate control monitoring system using fuzzy logic for enclosed areas

Design of a Microcontroller-Based Heating System Controller Using Fuzzy Logic

Mathematical modelling, analysis and design of fuzzy logic controller for the control of ventilation systems using MATLAB fuzzy logic toolbox

Fuzzy Controller for Indoor Air Quality Control: A Sport Complex Case Study

Fuzzy Logic Controlled Simulation in Regulating Thermal Comfort and Indoor Air Quality Using a Vehicle Heating, Ventilation, and Air-Conditioning System

STUDY OF THE MULTIPLE VARIABLES FUZZY CONTROL ON THERMAL AND HUMIDITY CONDITIONS

Development of Controllers for Temperature Control of a Room Deploying the Displacement Ventilation HVAC System

Control system of fume hood based on ARM

Energy Savings of Commercial Kitchen Ventilation and Air Conditioning Systems Based on Cooking Oil Control and Thermal Comfort

Development of Temperature Controllers for a Room Deploying the Displacement Ventilation for Heating, Ventilating, and Air-Conditioning

Energy efficient model based algorithm for control of building HVAC systems

Simulative study of a novel fuzzy demand controlled ventilation for façade-integrated decentralized systems in renovated residential buildings

Fuzzy Logic Controller for Classroom Air Conditioner

Towards a Computational Fluid Dynamics-Based Fuzzy Logic Controller of the Optimum Windcatcher Internal Design for Efficient Natural Ventilation in Buildings

Design of Control System for Range Hood Based on MSP430

Temperature and Humidity Control System for 20 kV of Cubicle with Multiple Input Multiple Output Fuzzy Logic Controller

Modeling, air balancing and optimal pressure set-point selection for the ventilation system with minimized energy consumption

Improving Indoor Air Quality and Thermal Comfort in Residential Kitchens with a New Ventilation System

Capture Efficiency and Thermal Comfort in Chinese Residential Kitchen with Push-Pull Ventilation System in Winter-a Field Study

Mathematical modeling and designing an optimized fuzzy temperature controller for a vacuum box electric furnace: Numerical and experimental study