Abstract:Building Services Engineering Research and Technology, Ahead of Print. Indoor air quality and heating energy consumption are closely linked, especially in densely occupied spaces, as classrooms. In a classroom of Rennes University, a transient thermal simulation highlights the impact of ventilation on heating consumptions for different cases: (1) without controlled mechanical ventilation (CMV), (2) with a single flow CMV (SF CMV) of a regulatory flow of 18 m3.h−1. person−1 during periods of occupancy, and (3) a double flow CMV (DF CMV) whose flow is during periods of occupancy either equal to 18 m3.h−1. person−1 or (4) to 35 m3.h−1.person−1. The infiltration flowrate was evaluated experimentally using CO2 concentration measurements in the first case, which corresponds to the actual situation. In the normal use of the classroom with 30 persons inside, CO2 concentration exceeds 5000 ppm and the heating energy consumption is equal to 52 kWh.m−2.year−1. In case (2) and (3), CO2 concentration has a maximum level of 1350 ppm and the energy consumption is equal to 65 and 53 kWh.m−2.year−1, respectively. In case (4), the maximum CO2 concentration stays in the range 800-900 ppm without excessive heating consumption (58 kWh.m−2.year−1). Finally, by limiting the fresh air flowrate to 18 m3.h−1.person−1 in DF CMV and coupling it to a façade insulation (extra Case 5), the heating consumption is reduced to 32 kWh.m−2.year−1. These results are valuable within the context of the upcoming energy renovation strategy of the campus.Practical applicationIn most schools, in France and elsewhere, insufficient ventilation flowrates are often observed compared to regulatory requirements. If compliance with ventilation standards and the subsequent revision of CMV installations are necessary to ensure the health of users, it is important to evaluate the energy cost of these renovations, and to identify the best choice to reduce heating consumptions. Our contribution is to compare different renovation choices in terms of two indicators: energy consumption and indoor air quality evaluated using CO2 concentration.

Simulative study of a novel fuzzy demand controlled ventilation for façade-integrated decentralized systems in renovated residential buildings

Simulations of a novel demand-controlled room-based ventilation system for renovated apartments

Comfort-oriented control strategies for decentralized ventilation using co-simulation

Hybrid Ventilation for Multi-Zone Buildings - Development of Optimal Control Strategies through Experiments and Dynamic Modelling

Thermal, Lighting and IAQ Control System for Energy Saving and Comfort Management

Optimising Mechanical Ventilation for Indoor Air Quality and Thermal Comfort in a Mediterranean School Building

Fuzzy Logic Controlled Simulation in Regulating Thermal Comfort and Indoor Air Quality Using a Vehicle Heating, Ventilation, and Air-Conditioning System

Multi-Objectives Optimization of Ventilation Controllers for Passive Cooling in Residential Buildings

Evaluation of performance of energy efficient hybrid ventilation system and analysis of occupants’ behavior to control windows

Demand Controlled Ventilation Strategies for High Indoor Air Quality and Low Heating Energy Demand

Hybrid ventilation in a nearly zero-energy building as a function of users' habits for better indoor air quality and thermal comfort in a warm climate

Design of Ventilation Systems in a Single-Family House in Terms of Heating Demand and Indoor Environment Quality

Multi-zone Outdoor Air Coordination Through Wi-Fi Probe-Based Occupancy Sensing

Computational modeling of natural ventilation in low-rise non-rectangular floor-plan buildings

Uncertainty quantification: For an IAQ and energy performance assessment method for smart ventilation strategies

Improving the ventilation of a classroom to achieve heating energy savings and better indoor air quality

Computer vision-based smart HVAC control system for university classroom in a subtropical climate

Multi-sensor Information Fusion Based Control for VAV Systems Using Thermal Comfort Constraints

Simulation of modern passive stack ventilation in a retrofitted Nordic apartment building

Simulation-aided development of a compact local ventilation unit with the use of CFD analysis

Implementation of Demand-Oriented Ventilation with Adjustable Fan Network