Abstract:Abstract There are significant challenges for materials in extreme environments for a variety of applications such as aircraft engines, gas turbines, nuclear reactors, reentry vehicles, and hypersonic structures. Ceramic matrix composites (CMCs) could be ideal candidates to meet these stringent requirements for materials due to their high melting temperatures, high oxidation, corrosion and ablation resistance, low creep, and thermal cycling behavior in such extreme environments. Particularly, continuous fibers can bridge cracks in CMCs and therefore improve the strength and fracture toughness of composites. CMCs are traditionally manufactured by the melting infiltration method. With this method, the high porosity and brittle structure of fabricated CMCs are not capable of withstanding high mechanical and thermal loads. Alternatively, polymer derived ceramic composites are fabricated by incorporating carbon fibers into polymer derived ceramic matrix to achieve high fracture toughness. With the aid of protective coatings with metallic or ceramic materials, such as Nickel and boride nitride, carbon fiber could potentially withstand high temperatures without oxidation. In this study, continuous fiber reinforced silicon oxycarbide composite was manufactured with polysiloxane (PSX) resin and woven carbon fabrics through the polymer infiltration and pyrolysis process (PIP). Re-infiltration of the PSX resin into the composites, curing in an autoclave, and pyrolysis for additional 2 to 10 cycles can increase the yield of ceramics of the composites. A dense structure of the composites was observed by SEM. The EDS results showed that the elemental composition of the composites mainly consisted of carbon, silicon and oxygen. The crystalline structure of the composites was examined through XRD to indicate the degree of polymer pyrolysis to ceramics. The results of four-point bending testing of the composites showed a flexural strength of 62.17MPa, a flexural modulus of 51.30GPa, and a fracture toughness of 1.3 × 108J/m3.

Continuous Gradient Ceramic/polymer Composite for Application in Large Temperature Gradient Connection by a Polymer-Derived Ceramic Route

Ablation Behavior of Gradient Ceramic-Polymer Composites in Wind Tunnel Environment

Double-Layered Carbon Fiber Stitched Fabric Reinforced Ceramic / Polymer Integrated Gradient Composites for Ablation Resistance, Thermal Insulation and Load-Bearing Performance

Oxyacetylene ablation resistance of continuous gradient ceramic–polymer composite

Dual bionics of structure and preparation: Gradient architectured carbon/ceramic composite as light as water but bearing ultra-high temperature max to 2500 °C

A strong, machinable, and multifunctional Ti3SiC2-(Ti3SiC2-Cf) composite: Gradient architecture and mechanical properties

Research on the Thermal Insulation Performance of High Temperature Gradient Composite Insulation Material

A Bi‐Gradient Dielectric Polymer/High‐Κ Nanoparticle/Molecular Semiconductor Ternary Composite for High‐Temperature Capacitive Energy Storage

Biphasic GaIn Alloy Constructed Stable Percolation Network in Polymer Composites over Ultrabroad Temperature Region

The facile and effective approach for fabricating polyurethane gradient materials with significant damping properties

Fabrication Of Sic/Cu Functionally Gradient Material By Graded Sintering

Integrated preparation and enhanced performance of high-melting-point ZrC–Mo multilayer graded materials

Compositionally Graded KNN‐Based Multilayer Composite with Excellent Piezoelectric Temperature Stability

Heat insulation and ablation resistance performance of continuous fiber reinforced composites with integrated gradient fabric

In-plane Compressive Properties and Failure Mechanisms of Gradient Cf/ZrB2-SiC Composites in High-Temperature Environment

Processing and Characterization of Continuous Carbon Fiber Reinforced Silicon Oxycarbide Ceramic Matrix Composites

Processing of carbon / ceramic gradient composites by the dipping method

Combustion Synthesis of TiB2-TiC/42CrMo4 Composites with Gradient Joint Prepared in Different High-Gravity Fields

Preparation and Characterization of Functional Gradient Porous Zro2 Ceramics

Bismaleimide/preceramic polymer blends for hybrid material transition regions

Effect of Chemical Vapour Infiltration Technique on the Gradient Microstructure and High-Temperature Strength of Gel-Cast Al2O3-based Ceramic Moulds