Abstract:Refrigerant generating bubble pump (RGBP) is the main component of diffusion absorption heat transformer (diffusion AHT), which is of great significance for waste heat recovery and lack of theoretical and experimental investigations. In present work, a high-accuracy semi-empirical model with H2O-CaCl2-R134a of good thermal stability has been firstly proposed by introducing generation and friction coefficients, which correlated geometry and operational parameters. The performance of RGBP with five independent operational parameters was calculated by the model. Moreover, experiments with five independent operational parameters were conducted by a closed setup, to validate the availability of the semi-empirical model. In the theoretical and experimental analyses, the refrigerant flow rate was used to evaluate generating performance, while the solution flow rate and pumping ratio were used to evaluate pumping performance. The results were concluded that: (1) the mean relative errors of refrigerant and solution flow rates between experimental and theoretical results were rapidly reduced from 103.34 % and 340.66 % to 18.29 % and 5.46 % by using the semi-empirical model; (2) higher generating temperature, larger diffusion gas flow rate, smaller concentration and lower system pressure promoted refrigerant generation; (3) higher motive head and smaller diffusion gas flow rate led to the increase of the solution flow rate and pumping ratio. The investigations may partially reveal the operation mechanism of RGBP, and the semi-empirical model is useful to predict performance of RGBP and choose suitable conditions of RGBP for the diffusion AHT with better performance.

Study on the Suction Capacity of Disc-Seal Single Screw Pump Used in Energy Recovery Systems

Study on the operating characteristic of disc seal single screw pump used in energy recovery systems

Theoretical study on the pressurization characteristics of disc-seal single screw pump used in high viscosity oily sludge conveying field

Theoretical and Experimental Study of Dry Scroll Vacuum Pump

Theoretical and Experimental Research on the Performance of a Refrigerant Generating Bubble Pump with a High-Accuracy Semi-Empirical Model

Test and analysis on the working process of dry scroll vacuum pump

Effect of Suction and Discharge Conditions on the Unsteady Flow Phenomena of Axial-Flow Reactor Coolant Pump

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Investigation on the Energy Exchange Characteristics of the Regenerative Flow Pump in an Automobile Fuel System

Design and Optimization of A Large Flow Rate Booster Pump in Swro Energy Recovery System

Semi-empirical Model of the Twin-Screw Refrigeration Compressor with Capacity Control Devices

Experimental Study on a Novel Pumpless Absorption Refrigeration System Using R134a/DMF As Working Pair

Theoretical Study on Wear Characteristics of Single Screw Refrigeration Compressor with Multicolumn Envelope Meshing Pair

Study on suction pressure loss near suction end and stagnant pressure rise in p-θ diagram of Twin-screw refrigeration compressor for chiller

Research of Thermal Dynamic Characteristics for Variable Load Single Screw Refrigeration Compressor with Different Capacity Control Mechanism

Theoretical and Experimental Study on Thermodynamic Performance of Single Screw Refrigeration Compressor with Multicolumn Envelope Meshing Pair

Numerical Analysis Of The Energy Recovery Process In A Disc -Type Pressure Exchanger With Pressure-Boost Effect

Research on the Meshing Characteristics of Disc-Seal Single Screw Pump

Performance improvement of a double-suction centrifugal pump for water supply system based on energy loss analysis and cavitation behaviour prediction

Research on Performance of Scroll Compressor and System under Suction Injection