Abstract:Compared with silicon and silicon carbide devices, the unique electrical and structural characteristics of gallium nitride high electron mobility transistors (GaN HEMTs) make them have different requirements for power module integration. This article proposes a novel integration scheme for the high-voltage lateral GaN HEMT dies without bonding wires. Based on the proposed integration scheme, a compact 650 V/30 A GaN power module with low parasitic parameters and high thermal performance is designed. The GaN dies are sandwiched between two ceramic substrates to improve thermal performance and ensure consistent thermal expansion coefficients. The multiple copper layer structure is used to increase wiring flexibility to reduce parasitic parameters. The design of gate and power loop layouts is discussed, and the common-mode (CM) capacitance is optimized. A comprehensive reliability evaluation is also carried out for this integration scheme. Finally, a double-sided cooling 650 V/30 A full-bridge GaN power module with 2.4 cm×1.3 cm×0.17 cm is fabricated. The thermal resistance is reduced by 30%–48% compared with the conventional single-sided cooling module. The power loop and gate loop inductances are reduced to 0.94 nH and 2 nH, respectively, and the CM capacitance is limited to 2.5 pF. The maximum dv/dt of the drain–source voltage is high as 150 V/ns with only 10% overshoot. Based on the power module, a 3.3-kW two-phase interleaved buck converter is developed. It has 820 W/in3 power density and 98.85% peak efficiency.

Monolithic Gan Half-Bridge Stages With Integrated Gate Drivers For High Temperature Dc-Dc Buck Converters

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

A GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping for High-Frequency DC-DC Converter.

Fully Integrated High-Voltage Level Shifts and Drivers for Buck Converters.

Monolithic Integration Design of GaN-based Power Chip Including Gate Driver for High-Temperature DC–DC Converters

A Monolithic GaN Driver with a Deadtime Generator (DTG) for High‐temperature (HT) GaN DC‐DC Buck Converters

A High Frequency High Efficiency GaN Based Bi-Directional 48V/12V Converter with PCB Coupled Inductor for Mild Hybrid Vehicle

A 1-Mhz High-Efficiency 12-V Buck Voltage Regulator with a New Current-Source Gate Driver

Design of power integrated circuits in full AlGaN/GaN MIS-HEMT configuration for power conversion

Monolithic Control and Drive Blocks of AlGaN/GaN MIS-HEMTs for DC-DC Buck Converters

A Monolithic GaN Power Stage with Common-Mode Transient Immunity and Negative Voltage Operation Design for High Frequency Power Converters

Monolithically Integrated GaN Power Stage for More Sustainable 48 V DC–DC Converters

Development of GaN Monolithic Integrated Circuits for Power Conversion

Design and Optimization of Gate Driver Integrated Multichip 3-D GaN Power Module

Design of DC-DC buck converter with integrated over-current protection based on power AlGaN/GaN MIS-HEMT configuration

Design Of Full Gan Power Integrated Dc-Dc Converter With Over-Current Protection

AlGaN/GaN Metal-Insulator-Semiconductor (Mis)-Hfets Based DC-DC Boost Converters with Integrated Gate Drivers

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

A 400-V Half Bridge Gate Driver for Normally-off GaN HEMTs with Effective dv/dt Control and High dv/dt Immunity

An Up to 10mhz 6.8% Minimum Duty Ratio GaN Driver with Dual-MOS-Switches Bootstrap and Adaptive Short-Pulse Based High-CMTI Level Shifter Achieving 6.05% Efficiency Improvement

All-GaN Power Integration: Devices to Functional Subcircuits and Converter ICs