Abstract:The cotton‐based metal‐air batteries without any catalyst are constructed. Especially, the continuous electrolyte flowing depends on the capillary force and the gravity from the height difference between the inlet and outlet. The performance of the cotton‐based metal‐air batteries under 2 mol L−1 NaOH or NaCl solutions is compared. The Al‐air battery performance in the NaOH solution is better, while the Mg‐air battery performance in the NaCl solution is the best. Considering the battery performance and cost, the alkaline cotton‐based Al‐air battery is investigated for the subsequent experiments. The Al‐air battery performance is evaluated under the different cotton cloth makeups, NaOH concentrations, height differences between the inlet and outlet. The results show that under the conditions of the cotton makeup (20 (warp) × 60 (yarn)), 4 mol L−1 NaOH and 60 mm height difference, the Al‐air battery performance is optimal, with the peak power density of 12.33 ± 0.38 mW cm−2 and limiting current density of 35.28 ± 0.73 mA cm−2. To apply the cotton‐based aluminum‐air battery, the two‐battery stack connected in series powers 15 LEDs. The experiments demonstrate the cotton‐based Al‐air battery without catalysts owns low cost and high power output, which has great potential as a micro power device. The cotton‐based metal‐air batteries with the height differences from the inlet and outlet are constructed. The electrolyte flowing depends on the capillary force together with the gravity. The metal‐air batteries performance under the NaOH alkaline or NaCl saline solutions is compared. Then, the alkaline Al‐air batteries performance is evaluated under the different cotton cloth makeups, NaOH concentrations and height differences. This article is protected by copyright. All rights reserved.

A Membraneless Microfluidic Fuel Cell with Continuous Multistream Flow Through Cotton Threads

A direct formate microfluidic fuel cell with cotton thread-based electrodes

Microfluidic fuel cells integrating slanted groove micro-mixers to terminate growth of depletion boundary layer thickness

Computational modeling of a thread-based microfluidic fuel cell with carbon fiber electrodes

Textile-Based Membraneless Microfluidic Double-Inlet Hybrid Microbial-Enzymatic Biofuel Cell

Composite Membranes from Quaternized Chitosan Reinforced with Surface-Functionalized PVDF Electrospun Nanofibers for Alkaline Direct Methanol Fuel Cells

Continuous Flowing Membraneless Microbial Fuel Cells with Separated Electrode Chambers

Characterization of Microfluidic Fuel Cell Based on Multiple Laminar Flow

A flexible on-fiber H2O2 microfluidic fuel cell with high power density

A Paper‐based Self‐pumping Microfluidic Fuel Cell Stack with a Novel Vertical Structure

A microfluidic-structured flow field for passive DMFCs operating with highly concentrated fuels

Enhancing fuel transport and cell performance by an anodic wedge-shaped channel in a paper-based microfluidic fuel cell

Effects of anode flow field design on the performance of micro direct methanol fuel cell

Cotton‐based Metal‐air Batteries without Catalysts as Low‐Cost Micro Power Devices

A Counter-flow Microfluidic Fuel Cell Achieving Concentrated Fuel Operation

A breakthrough in the performance and fuel utilization of methanol microfluidic fuel cell via viscous co-flow electrolyte

Enabling high-concentrated fuel operation of fuel cells with microfluidic principles: A feasibility study

A Metallic Gas Diffusion Layer and Porous Media Flow Field for Proton Exchange Membrane Fuel Cells

Passive direct methanol fuel cell using woven carbon fiber fabric as mass transfer control medium

Membrane/Electrode Interface Design for Effective Water Management in Alkaline Membrane Fuel Cells.

High Power Density Direct Formate Microfluidic Fuel Cells with the Different Catalyst-Free Oxidants.