Cotton‐based Metal‐air Batteries without Catalysts as Low‐Cost Micro Power Devices

Chunmei Liu,Pengfei Jiang,Jingjie Liu,Jiaming Gu,Gaoqiang Lai
DOI: https://doi.org/10.1002/ente.202300555
IF: 4.149
2023-09-06
Energy Technology
Abstract:The cotton‐based metal‐air batteries without any catalyst are constructed. Especially, the continuous electrolyte flowing depends on the capillary force and the gravity from the height difference between the inlet and outlet. The performance of the cotton‐based metal‐air batteries under 2 mol L−1 NaOH or NaCl solutions is compared. The Al‐air battery performance in the NaOH solution is better, while the Mg‐air battery performance in the NaCl solution is the best. Considering the battery performance and cost, the alkaline cotton‐based Al‐air battery is investigated for the subsequent experiments. The Al‐air battery performance is evaluated under the different cotton cloth makeups, NaOH concentrations, height differences between the inlet and outlet. The results show that under the conditions of the cotton makeup (20 (warp) × 60 (yarn)), 4 mol L−1 NaOH and 60 mm height difference, the Al‐air battery performance is optimal, with the peak power density of 12.33 ± 0.38 mW cm−2 and limiting current density of 35.28 ± 0.73 mA cm−2. To apply the cotton‐based aluminum‐air battery, the two‐battery stack connected in series powers 15 LEDs. The experiments demonstrate the cotton‐based Al‐air battery without catalysts owns low cost and high power output, which has great potential as a micro power device. The cotton‐based metal‐air batteries with the height differences from the inlet and outlet are constructed. The electrolyte flowing depends on the capillary force together with the gravity. The metal‐air batteries performance under the NaOH alkaline or NaCl saline solutions is compared. Then, the alkaline Al‐air batteries performance is evaluated under the different cotton cloth makeups, NaOH concentrations and height differences. This article is protected by copyright. All rights reserved.
energy & fuels
What problem does this paper attempt to address?