Abstract:Many subsea structures have non-uniform geometries, which extend only a finite distance above the seabed. To better understand local scour at these structures, this paper presents scour measurements from an experimental study of submerged compound piles comprised of a circular superstructure supported by a circular foundation. The experiments were conducted in the clear-water regime and considered the effect of three different ratios describing the structural geometry: (i) the overall height of the compound structure above the initial bed level to the diameter of the super-structure <math>h1/D1</math>; (ii) the height of the foundation exposed above the initial bed level relative to the overall height of the superstructure <math>h2/h1</math>; and (iii) the diameter of the foundation to that of the superstructure <math>D2/D1</math>. In all cases <math>D2≥D1</math> and <math>h1≥h2≥0</math> (i.e. the foundation and superstructure where never buried). The experimental results indicate that, if all other parameters are held constant, the non-dimensional equilibrium scour depth <math>S0/D2</math> increases with both <math>h1/D1</math> and <math>h2/h1</math>, and decreases as <math>D2/D1</math> increases. To quantitatively explain these trends the experimental results are compared with a range of existing methods to predict scour depth for non-uniform (or complex) surface piercing piles. Of these methods it is found that an effective pile height and an effective pile diameter, computed using simple geometric arguments, give good agreement. The concept of effective height is also shown to collapse time-scale measurements of the scour process convincingly across the full range of experimental results and to explain the extent and shape of the local scour hole reasonably well. Collectively, these findings suggest that the calculation of an effective height may be used to provide a reasonable first approximation to estimate the rate and extent of local scour around submerged compound structures.

Scouring by Submerged Steady Water Jet Vertically Impinging on a Cohesive Bed

Incompressible Sph Scour Model for Movable Bed Dam Break Flows

Effect of Inclination Angles on the Local Scour Around a Submerged Cylinder

Scour characteristics at the periphery of a vertical pile under steady flow

Scour of Cohesive Nonuniform Sediment

Laboratory Flume Experiments on Cohesive Sediment Erosion by Oscillating Wall Jet

Local Scour on Noncohesive Beds by a Submerged Horizontal Circular Wall Jet

Scour Caused by A Propeller Jet

Study on the Scour Mechanism of Sandy Seabed below Submarine Pipelines

3D Numerical Modeling of Flow and Scour Around a Circular Pile

Time Development of Scour Around Pile Groups in Tidal Currents

Experimental investigation of local scour around cylindrical pile foundations in a double-layered sediment under current flow

Experimental investigation on scour topography around high-rise structure foundations

Scour due to circular jets in cohesive soils: Physical evidence from three-dimensional laboratory tests

Characteristics of Initial Development of Plane Jet Scour

Investigation of Submerged Soil Excavation by High-Velocity Water Jet Using Two-Fluid Smoothed Particle Hydrodynamics Method

Simulation of the flow field and scour evolution by turbulent wall jets under a sluice gate

Experimental study on silty seabed scour around the single pile induced by the current

Experimental study of local scour around submerged compound piles in steady current

Experimental and Numerical Investigation on Scour Pits of Granular Flow Downstream Check Dam

Scour around the single emergent cylinder due to subcritical and supercritical approach flow conditions