Abstract:Two-dimensional (2-D) quadrant analysis is generally used for investigating flow and sediment dynamics around a rigid structure in open channel flows. Given that particle distribution around rigid obstacles is not spatially uniform and changes in time, while vortices evolve to become three-dimensional (3-D) structures, 2-D quadrant analysis might be unsuitable to completely determine the sediment transport. Hence, 3-D quadrant and 3-D octant analyses should be considered, using the 3-D instantaneous velocity data and relative 3-D bursting process to define sediment transport surrounding the submerged square and circular cylinders. The turbulent kinetic energy (TKE), transition probabilities, occurrence probabilities, stress fraction and angles of inclination of 3-D bursting events are considered to quantify the coherent structures surrounding the cylinders and their interaction with bed particles. Experiments were conducted at the Hydraulics and Water Resources Engineering Laboratory, School of Infrastructure, Indian Institute of Technology, Bhubaneswar, Odisha, India, and velocity data were recorded at different cross-sections around the submerged cylinders using an acoustic Doppler velocimeter. Results show that the TKE is greater for internal ejection, external ejection, and internal sweep, external sweep in the upstream of the circular and square cylindrical structures. On the other part, the TKE is significant for internal ejection, external ejection, and internal sweep, external sweep in the downstream of the aligned square cylindrical structures, which justifies the highest scour depth that occurred upstream of the circular and square cylindrical structures and downstream of the aligned square cylindrical structure. The transition probability of the bursting events was determined using the Markov process from the measured velocity data to investigate the consecutive occurrence of bursting events. Further, the importance of sweeps and ejections on sediment erosion surrounding the cylinders within the scour hole at various stages of its development was investigated via 3-D quadrant analysis of the bursting occurrences. The outcomes show that external sweep and internal ejection events are active mechanisms for bed particle transport surrounding the cylinder. The maximum transition probability values are found around aligned cylindrical structures in comparison with the circular and square cylindrical structures in the transverse direction. This depicts the formation of a trailing vortex on both sides of the aligned square cylindrical object. The results reveal that the effect of inclination angles with respect to the water flow is greater for internal ejection and external sweep from upstream to downstream within the scour hole surrounding the cylindrical structures at various phases of development as horseshoe vortices and downflow develop upstream of the cylindrical structures while trailing vortices and wake vortices form at the top and downstream of the cylindrical structures. Internal and external ejection have a higher stress fraction than an internal and external sweep for square cylinders with alignment angles of 0°, 20° and circular cylinders over underdeveloped and developed scoured beds, respectively. With the higher percentage of fractional contributions for internal sweeps, the external sweep is predicted close to the cylindrical objects in comparison with the internal ejection and external ejection events because of the formation and warping of the horseshoe vortex close to the cylindrical objects, suggesting a significant probability of 3-D bursting occurrences with sediment movement near the cylindrical structures.

Scour around the single emergent cylinder due to subcritical and supercritical approach flow conditions

Incompressible Sph Scour Model for Movable Bed Dam Break Flows

Effect of Inclination Angles on the Local Scour Around a Submerged Cylinder

Scour characteristics at the periphery of a vertical pile under steady flow

Scour around twin-piles under combined wave–current flows

Scour of Cohesive Nonuniform Sediment

Numerical Simulation of Local Scour and Flow Field Around Pipelines

3D Numerical Modeling of Flow and Scour Around a Circular Pile

Three-dimensional bursting process and turbulent coherent structure within scour holes at various development stages around a cylindrical structure

Experimental investigation of local scour around cylindrical pile foundations in a double-layered sediment under current flow

Computational fluid dynamics modeling of scour around abutment geometries under combined effects of waves and currents

Physics of Flow and Local Scour Depth Around Spur Dikes

Time Development of Scour Around Pile Groups in Tidal Currents

Spatiotemporal Scouring Processes around a Square Column on a Sloped Beach Induced by Tsunami Bores

Simulation of the flow field and scour evolution by turbulent wall jets under a sluice gate

Study on the Scour Mechanism of Sandy Seabed below Submarine Pipelines

Unified Criterion for Clear‐Water Local Scour Induced by Junction Flows and Wall Jets

Experimental study of local scour around submerged compound piles in steady current

Experimental Investigation on Scour Development and Scour Protection for Offshore Converter Platform

Numerical modeling of local scour around a subsea pipeline on cohesive seabed under steady currents

Alluvial channel hydrodynamics around tandem piers with downward seepage