Abstract:The paper presents three dimensional simulations of scour around a pair of piles arranged side-by-side configurations under combined wave–current flow conditions using a computational fluid dynamics model. The Reynolds-averaged Navier–Stokes (RANS) equation is solved using the k- ω turbulence model in the present work. The Exner equation is used to measure the variations in bed elevation. The level-Set approach is used to capture the free surface realistically. The numerical model couples the hydrodynamic module with the morphological module to simulate the scour process. For accurate erosion and deposition calculations in the sediment bed, the morphological model employs a modified bed shear stress formula on a sloping bed in combination with a sand slide algorithm. In the present study, the simulations have been done in a truncated numerical wave tank with the Dirichlet boundary condition and active wave absorption method. The numerical model is validated with the experimental results of combined wave–current hydrodynamics and scour around a pair of piles. The validated numerical model is utilized to study the effect of the gap ratio and the effect of KC number in the various combined wave–current environment. In low KC conditions, normalised scour depth increments owing to waves alone, weak currents, and moderate currents are less, whereas the scour depth increases dramatically for waves with high currents. It is also found that the gap flow between the piles increases the depth of scour in a significant manner. For a given pile gap ratio, the scour depth is dependent on the KC number, which implies the larger the KC number, the larger scour depth. For a given KC number, the scour hole stretch in the flow direction reduces as the gap ratio increases, whereas the perpendicular stretch increases. It is also obverved that the normalized scour depth decreases as the gap ratio increases for a fixed KC number and fixed Ucw . It is evident from the present research that the normalized scour depth increases with increase in KC number for a fixed wave–current parameter ( Ucw ).

Computational fluid dynamics modeling of scour around abutment geometries under combined effects of waves and currents

Effect of Inclination Angles on the Local Scour Around a Submerged Cylinder

Numerical modelling on effect of loading rate on uplift behavior of suction caissons

Scour around twin-piles under combined wave–current flows

Three-Dimensional Numerical Modeling of Pier Scour Under Current and Waves Using Level-Set Method

Coupled Computational Fluid Dynamics-Discrete Element Method for Simulating the Interactions Between Ship-Induced Waves and Riprap on Restricted Waterway Banks

3D Numerical Modeling of Flow and Scour Around a Circular Pile

Numerical investigation of local scour around USAF with different hydraulic conditions under currents and waves

Three-Dimensional Numerical Modeling of Local Scour Around Bridge Foundations Based on an Improved Wall Shear Stress Model

Numerical study of sediment scour at meander flume outlet of boxed culvert diversion work

Study of local scour around rectangular and square subsea caissons under steady current condition

Time Development of Scour Around Pile Groups in Tidal Currents

CFD modelling of local scour around Tri-USAF in sand with different arrangements under steady current

Experimental Study on Local Scour Depth around Monopile Foundation in Combined Waves and Current

Unified Criterion for Clear‐Water Local Scour Induced by Junction Flows and Wall Jets

An Experimental Study on Pile Scour Mitigating Measures under Waves and Currents

Experimental Investigation on Scour Development and Scour Protection for Offshore Converter Platform

The Application of Soft Computing Models and Empirical Formulations for Hydraulic Structure Scouring Depth Simulation: A Comprehensive Review, Assessment and Possible Future Research Direction

Numerical simulation of local scour around bridge piers using novel inlet turbulent boundary conditions

Scour around the single emergent cylinder due to subcritical and supercritical approach flow conditions

Analytical approach for predicting local scour downstream of submerged sluice gate with an apron