Abstract:Bed load sediment transport governed by particle saltation in supercritical open channel flows cause bedrock incision in high‐gradient mountain streams, and hydro‐abrasion at hydraulic structures. Hence, a better understanding of turbulent flow characteristics and particle dynamics are of prime importance for the prediction of river and landscape evolution, and for a sustainable design of hydraulic structures. To this end, we experimentally investigated single particle dynamics in supercritical open channel flows over fixed planar and abraded beds covering smooth, transitionally rough, and hydraulically rough regimes. The experiments were performed at the Laboratory of Hydraulics, Hydrology and Glaciology (VAW) of ETH Zürich in a wide range of hydraulic conditions with various channel width‐to‐depth aspect ratios (b/ho) and Froude numbers (F). We investigated the motions of five particle groups differing in shape, hardness, and diameter. By means of a high‐speed camera, the particle velocities and trajectory parameters such as hop height and hop length were determined using Particle Tracking Velocimetry (PTV). The results reveal that at least 120 individual particles should be used in the tests to determine sound statistics of particle trajectories. In the present test conditions, the particles are dominantly transported in saltation. The effects of particle properties such as shape and diameter on the particle trajectories are negligible, while the rolling probability of the particles for a given flow condition increases with increasing diameter. Bed roughness was found to be the key parameter having a significant effect on the saltation trajectories and horizontal energy transfer. Hop height, hop length and particle velocities as well as horizontal energy transfer increase with increasing bed roughness. Based on the saltation trajectory data, non‐dimensional equations are developed for each hydraulic regime and used to enhance the saltation‐abrasion model by Sklar and Dietrich (2004). The present findings contribute to a better understanding of particle motion characteristics under different hydraulic and roughness conditions and their effect on mechanics and prediction of bedrock incision and hydro‐abrasion in three‐dimensional supercritical open channel flows occurring in steeply sloped rivers and at hydraulic structures.

On the erosion due to inclined jets

Incompressible Sph Scour Model for Movable Bed Dam Break Flows

Numerical Investigation of Sand-Bed Erosion by an Upward Water Jet

Experimental Observations on the Initiation of Sand-Bed Erosion by an Upward Water Jet

Effect of Inclination Angles on the Local Scour Around a Submerged Cylinder

Scour due to circular jets in cohesive soils: Physical evidence from three-dimensional laboratory tests

Simulation of the flow field and scour evolution by turbulent wall jets under a sluice gate

Scaling laws for two- and three-dimensional wall jet scour based on the phenomenological theory of turbulence

Using side flow jets as a scour countermeasure downstream of a sluice gate

Erosion Characterization Of Gas-Solid Jets Impinging Onto Inclined Surfaces

Experiments, analytical and HYDRUS2D modeling of steady jet of quasi-normal surface flow in rectangular channel coupled with vertical seepage: Vedernikov-Riesenkampf's legacy revisited

Eulerian-Lagrangian investigation of erosion wear within a water-submerged Jet: Two-way coupling

Characteristics of Initial Development of Plane Jet Scour

Competitive dynamics of two erosion patterns around a cylinder

Near-bed eddy scales and clear-water local scouring around vertical cylinders

Particle Saltation Trajectories In Supercritical Open Channel Flows: Roughness Effect

Analytical approach for predicting local scour downstream of submerged sluice gate with an apron

J. CASALí, LM De SANTISTEBAN,). J. LóPEZ, JV GIRALDEZ, J. POESEN, J. NACHTERGAELE, M. GONI, J. LOIZU and

Erosion Characteristics of Hydraulic Turbine Guide-Vane End Clearance in Sediment Water Flow: A Simplified Model Analysis

Particle Image Velocimetry Measurements of Bed-Shear Stress Induced by Wall-Bounded Swirling Jets

Deposition behaviour of inclined momentum sediment-laden jet