Abstract:This paper presents an experimental study on the characteristics of the propeller-induced flow field and its associated scour hole around a closed type quay (with a vertical quay wall). An “oblique particle image velocimetry” (OPIV) technique, which allows a concurrent measurement of the velocity field and scour profile, was employed in measuring the streamwise flow field (jet central plane) and the longitudinal centerline scour profile. The asymptotic scour profiles obtained in this study were compared with that induced by an unconfined propeller jet in the absence of any berthing structure, which demonstrates the critical role of the presence of the quay wall as an obstacle in shaping the scour profile under the condition of different wall clearances (i.e., longitudinal distance between propeller and wall). Moreover, by comparing the vortical structure within the asymptotic scour hole around the vertical quay wall with its counterpart in the case of an open quay (with a slope quay wall), the paper examines the effect of quay types on the formation of the vortex system and how it determines the geometrical characteristic of the final scour profile. Furthermore, the temporal development of the mean vorticity field and the vortex system are discussed in terms of their implications on the evolution of the scour hole. In particular, comparison of the circulation development of the observed vortices allows a better understanding of the vortex scouring mechanism. Energy spectra analysis reveals that at the vortex centers, their energy spectra distributions consistently follow the −5/3 law throughout the entire scouring process. As the scour process evolves, the turbulent energy associated with the near-bed vortex, which is responsible for scouring, is gradually reduced, especially for the small-scale eddies, indicating a contribution of the dissipated turbulent energy in excavating the scour hole. Finally, a comparison of the near-bed flow characteristics of the average kinetic energy (AKE), turbulent kinetic energy (TKE), and Reynolds shear stress (RSS) are also discussed in terms of their implications for the scour hole development.

Scour Caused by A Propeller Jet

Recent Advances in Understanding Propeller Jet Flow and Its Impact on Scour

Propeller Jet–Induced Suspended-Sediment Concentration

Physically based formula for the maximum scour depth induced by a propeller jet

Scouring by Submerged Steady Water Jet Vertically Impinging on a Cohesive Bed

Effect of Inclination Angles on the Local Scour Around a Submerged Cylinder

Sediment Re-Suspension Due To Propeller Wash

Vortex Evolution Within Propeller Induced Scour Hole Around a Vertical Quay Wall

Scour characteristics at the periphery of a vertical pile under steady flow

Scaling laws for two- and three-dimensional wall jet scour based on the phenomenological theory of turbulence

Scour of Cohesive Nonuniform Sediment

Physics of Flow and Local Scour Depth Around Spur Dikes

Numerical study of the hydrodynamic performances of surface piercing propeller

New Formula for Scour Depth at Piles Based on Energy Equilibrium

Scour due to circular jets in cohesive soils: Physical evidence from three-dimensional laboratory tests

Local Scour on Noncohesive Beds by a Submerged Horizontal Circular Wall Jet

Experiment investigation on the local scour around circular and square piles in open wharf

Characteristics of Initial Development of Plane Jet Scour

3D Numerical Modeling of Flow and Scour Around a Circular Pile

Unified Criterion for Clear‐Water Local Scour Induced by Junction Flows and Wall Jets

Experimental Investigation of Scour Around Circular Arrangement Pile Groups