Abstract:Microstructure has significant effects on the mechanical properties of AlSi10Mg alloy. Therefore, an in-depth understanding of microstructure evolution, such as dendrite and Al-Si eutectic, is of great significance to obtain the desirable microstructure and manage the performance of AlSi10Mg components. In the current work, an integrated dendrite and eutectic evolution model based on the cellular automaton-finite difference (CA-FD) method, taking account of solute distribution, growth kinetics, and nucleation mechanism, was established. Microstructures of the as-built selective laser melted (SLMed) samples were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) techniques, and the experimental results showed that the microstructure consisted of Al grains and Al-Si eutectic networks in the individual melt pool. Dendrite growth, solute redistribution in ternary alloy and dendritic morphologies with different cooling rates were numerically investigated. In addition, the proposed model was also applied to predict the Al-Si eutectic evolution, and eutectic morphologies under eutectic undercooling in a range of 5 K to 20 K were also simulated. The simulated results indicated that dendrites were refined with the increasing of the cooling rates, and Al-Si eutectic morphology was sensitive to eutectic undercooling such that higher eutectic undercooling refined the eutectic microstructures. Model validations were performed, and the experimental results agreed well with the simulation results, indicating that the proposed model can successfully reproduce both dendrite and eutectic microstructures.

MORPHOLOGY OF EUTECTIC Si IN OVER-MODIFIED Al-Si EUTECTIC ALLOY

Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy During Annealing

Morphological features of unmodified eutectic Si and morphological transformation after solution treatment

Dendritic Si growth morphologies in highly undercooled Al-Si alloys

Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al-Si alloy

In situ SEM characterization of tensile behavior of nano-fibrous Al–Si and Al–Si–Sr eutectics

Modification of Eutectic Si in Al–Si Alloys with Eu Addition

Microstructure Evolution of Primary Si Phase in Hypereutectic Al-20Si Alloys Prepared by Centrifugal Casting under an Electromagnetic Field

Al-Si nano clusters and short-range orders induced fibrous modified eutectic Si

Experimental Study and Numerical Simulation of Microstructure Evolution in Al-Si Eutectic Solidification Process

Morphologies of Si Phase and La-rich Phase in As-Cast Hypereutectic Al–Si–xLa Alloys

Cellular Automaton Simulation and Experimental Validation of Eutectic Transformation During Solidification of Al-Si Alloys

Nanoparticle-Induced Nucleation of Eutectic Silicon in Hypoeutectic Al-Si Alloy

Segregation and Morphological Evolution of Si Phase during Electromagnetic Directional Solidification of Hypereutectic Al-Si Alloys

Formation of Heterostructure with Appearance of α-Al Phase in Hyper- and Eutectic Al-Si Alloys by Solidification at High Rate

Physical properties and solidification structure of Al-Si eutetic alloy melt with cerium modification

Modeling and Simulation Investigations on Microstructure Evolution during Additive Manufacturing of AlSi10Mg Alloy

Physical properties and solidification structure of Al-Si eutectic alloy melt with cerium modification

Microstructure and Crystallization Evolution of Directionally Solidified Al–Cu–Si Alloys With the Assistance of a Static Magnetic Field

Experimental and Modeling Studies of the Lamellar Eutectic Growth of Mg-Al Alloy

Effect of modification and subsequent heat treatment on thermal and mechanical properties of near-eutectic Al-Si-Fe-Mg alloys