Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Research on the Combinations of Pole and Slot for Twelve-Phase Fractional-Slot Concentrated-Winding Permanent Magnet Motor

Influence of slot and pole number combination on radial force and vibration modes in fractional slot PM brushless machines having single- and double-layer windings

Design Optimization and Performance Investigation of Linear Doubly Salient Slot Permanent Magnet Machines

An Analytical Model of Unbalanced Magnetic Force in Fractional-Slot Surface-Mounted Permanent Magnet Machines

Winding Configurations and Pole/Tooth Combinations of Doubly-Fed Flux-Switching Permanent Magnet Machines

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Slot/Pole Number Combination Research of-PM Linear Motors With Fractional Slots per Pole

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Analysis of a Novel Linear Doubly Salient Slot Permanent Magnet Motor

Different Slot/Pole Combination Vibro-acoustics of Permanent Magnet Synchronous Motor

Analysis of Half-Coiled Short-Pitch Windings with Different Phase Belt for Multiphase Bearingless Motor

The research on performances of interior permanent magnet synchronous motor with different pole and slot combinations

Slot/Pole Relationship and Winding Configuration of Dual Winding Dual PM Flux Modulated Machines

Study of Characteristics According to Pole–Slot Combination of Fractional Slot Concentrated Winding Permanent Magnet Synchronous Motor

Study of the number of slots/pole combinations for low speed high torque permanent magnet synchronous motors

Quantitative Comparison for Fractional-Slot Concentrated-Winding Configurations of Permanent-Magnet Vernier Machines

Design and harmonic analysis of single winding bearingless PM synchronous motor with high winding coefficient

Research on Winding MMF Harmonics of the PMSM with the Same Number of Poles and Slots

Research on Fractional Slot Permanent Magnet Synchronous Motors with Asymmetric Winding

Vibration of permanent magnet synchronous motor with different slot-pole combinations and winding layers