Abstract:An all-fiber Fabry-Perot interferometer (FPI) strain sensor based on offset splicing fibers and Vernier effect is proposed and experimentally demonstrated. The proposed sensor consists of two separated air-cavity FPIs connected by a long section of single mode fiber (SMF) in a fiber link. The two separated FPIs have approximately equal optical paths, so that the Vernier effect can be generated. One FPI is used as the sensing FPI (SFPI) for strain measurement, which is formed by splicing a section of microfiber between two SMFs with large lateral offset. The other FPI is used as the reference FPI (RFPI) to employ the Vernier effect and amplify the sensitivity, which is formed by splicing a section of silica tube between two SMFs. Compared to a single FPI based sensor, the strain sensitivity of the proposed sensor with Vernier effect can be improved by tens of times. The strain sensitivity of our proposed sensor reaches 1.3 nm/mu epsilon, which is the highest strain sensitivity of fiber sensor based on FPI and wavelength demodulation mechanism. Since the air-cavity SFPI is insensitive to temperature, the proposed sensor also exhibits low temperature sensitivity of 50.2 pm/degrees C. With the advantages of high strain sensitivity, low temperature cross-sensitivity, compact size and easy fabrication, the proposed sensor has great applications in many fields.

Miniature Fabry-Perot Interferometer Based on a Movable Microsphere Reflector.

Tunable Fabry-Perot Interferometer from Ferroelectric Polymer Based on Surface Energy Modification

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Miniaturized Fiber Probe Reflective Interferometer Sensor

Microbubble based fiber-optic Fabry-Perot interferometer formed by fusion splicing single-mode fibers for strain measurement.

Micro Fabry-Perot interferometers in silica fibers machined by femtosecond laser.

Miniaturized fiber taper reflective interferometer for high temperature measurement.

High Sensitivity, Low Temperature-Crosstalk Strain Sensor Based on a Microsphere Embedded Fabry–Perot Interferometer

Ultra-small Fiber Taper Fabry-Perot Modal Interferometer

High Sensitivity Fabry-Perot Interferometer Based on Offset Splicing Fibers and Vernier Effect for Strain Measurement

Miniature Fabry-Perot interferometric sensor for temperature measurement based on photonic crystal fiber

Polymer Microbubble-Based Fabry–Perot Fiber Interferometer and Sensing Applications

Spheroidal Fabry-Perot microcavities in optical fibers for high-sensitivity sensing

High-sensitivity Double-Parameter Sensor Based on the Fibre-Tip Fabry–Pérot Interferometer

Open-Cavity Fabry-Perot Interferometer Based on Etched Side-Hole Fiber for Microfluidic Sensing

A Fabry-Perot Interferometer Sensor Based on a Microsphere Tellurite Fiber Probe for Temperature and Hydraulic Pressure Measurement

A Miniature Fiber-Optic Refractive-Index Sensor Based on Laser-Machined Fabry-Perot Interferometer Tip

Hybrid Fabry–Perot interferometer: polymer-induced microcavity for temperature and gas pressure measurement

Fabry–Perot interferometer fiber tip sensor based on a glass microsphere glued at the etched end of multimode fiber

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

Microfluidic Refractive Index Sensor Based on an All-Silica In-Line Fabry-Perot Interferometer Fabricated with Microstructured Fibers.