Abstract:The graphical abstract shows the research methods and results of ultrasonic welding test of carbon fiber reinforced PA6 composites. Firstly, the weldability of the material was explored, and CF/PA6 was selected. Secondly, the determination of welding equipment, including welding horn, fixture and welding equipment. Finally, the ultrasonic welding process is developed. The results of welding temperature, microstructure and mechanical properties of joints were analyzed to better explain the research findings of USW of CFRTP. Short carbon fiber composites have high specific modulus, high specific strength and excellent formability, which are suitable for short‐term and environmentally friendly ultrasonic welding. In this study, ultrasonic welding experiments were conducted on short carbon fiber reinforced PA6 composites using a servo‐driven non‐metallic ultrasonic welder. The weld specimens were analyzed for spot weld morphologies, interfacial bonding strength, failure modes and compressive shear fracture to establish the correlation between weld energy and weld quality. The results indicate that when the welding energy is 450 J, the short carbon fibers are interlaced at the interface, which has a pinning effect, thereby enhancing the joint strength reaching 2990 N, and the welding efficiency reaches 46%. Besides, the compressive shear section is divided into regions. The proportion of heat and area in different compressive shear regions are quantitatively analyzed, and the calculation model of joint strength is proposed. Meanwhile, the correlation between welding energy and its correlation, as well as three different shear failure modes, is obtained. This work is helpful for the optimization of carbon fiber reinforced thermoplastic (CFRTP) ultrasonic welding process parameters and the evaluation of joint strength. Highlights A special fixture for ultrasonic welding was designed to optimize the welding energy process of ultrasonic welding CFRTP, and the properties of ultrasonic welded joints were analyzed. When the welding energy is 450 J, a high shear strength welded joint of 2990 N was successfully prepared. The shear fracture of the welded joint was successfully obtained by designing a special clamp for compression shearing. The welding area was qualitatively divided according to the temperature measurement results of the interface center. In addition, the heat and area ratio of different zones in the compression‐shearing area under different welding energy were quantitatively analyzed, and the calculation model of joint strength was proposed. At the same time, the welding energy and its correlation, as well as three different shear failure modes were obtained. The short fiber distribution characterization and pores effect on the joint's strength were analyzed. The appearance of porosity defects has a significant weakening effect on the welded joint.

Ultrasonic welding of CF/epoxy‐CF/PEI joints with enhanced vibration transfer efficiency and optimized welding quality

Resistance Welding of Carbon Fiber Reinforced Polyetherimide Composit

Resistance Welding of Carbon Fibre Reinforced Polyetheretherketone Composites Using Metal Mesh and PEI Film

Ultrasonic welding of CF/PEEK composites: Influence of welding parameters on interfacial temperature profiles and mechanical properties

Effects of Energy Director Types on the Interface Morphology and Tensile Properties of Ultrasonically Welded CF/PAEK Joints

Study on thermal-assisted underwater friction stir welding for carbon fiber-reinforced polyetherimide

Friction Spot Welding of Carbon Fiber-Reinforced Polyetherimide Laminate

Influence mechanism of welding time and energy director to the thermoplastic composite joints by ultrasonic welding

Improving the Quality of Resistance Welded Thermoplastic Composite Joints by Applying Ultrasonic

Bonding strength of short carbon fiber reinforced PA6 composites ultrasonic welding joints

Mechanical characterization of ultrasonically welded CF/PEEK laminates by short beam shear test

Effect of ultrasonic embossing and welding time on the joint performance of ultrasonically welded short carbon fiber reinforced PEEK

Significantly enhanced joint strength and fatigue life of aerospace composite joints by using novel PEEK/PPS woven meshes as joining agent

Friction stir spot welding of 5052 aluminum alloy to carbon fiber reinforced polyether ether ketone composites

Cellulose Nanocrystal-Polyetherimide Hybrid Nanofibrous Interleaves for Enhanced Interlaminar Fracture Toughness of Carbon Fibre/epoxy Composites

The Effect of Surface Treatment on the Resistance Welding Technology for Carbon Fiber/Epoxy Resin Composites

High Pressure–Amplitude Ratio Ultrasonic Spot Welding of Thermoplastic Carbon Fiber‐Reinforced Epoxy

Study on microstructures and mechanical performance of laser transmission welding of poly-ether-ether-ketone (PEEK) and carbon fiber reinforced PEEK (CFR-PEEK)

Double-Pulse Ultrasonic Welding of Carbon-Fiber-Reinforced Polyamide 66 Composite

Single-sided ultrasonic welding of carbon fiber/Nylon 66 composite

The mix-mode fracture behaviour of aerospace composite joints co-cured by different forms of advanced thermoplastics