Abstract:Performance of FFF‐processed PEI as printed and with reinforcing fiber wrapping. High‐performance engineering thermoplastics are important emerging materials, particularly when processed using additive manufacturing technologies. One of the most important among these is polyetherimide, also known as PEI or ULTEM. Using the fused filament fabrication (FFF) additive manufacturing (AM) process to form this material is a good option, but it is difficult to control the properties in some cases due to the very high processing temperature compared with most engineering thermoplastics. One way to "even‐out" the properties is to wrap the specimens in continuous glass or carbon fibers embedded in a thermosetting matrix, as this allows strategic placement and orientation of reinforcement. This also complements the natural structure of the FFF‐manufactured materials, helping to minimize the amount of additional weight that needs to be added to a part. To further knowledge in this area, the present study explored and compared the interlaminar tensile strength of FFF‐processed PEI/ULTEM 9085 specimens and compared them with ones wrapped in carbon fibers with a 2‐part resin matrix. Experiments were performed in accordance with the guidelines given in the ASTM D6415 standard and replicated five times. Variations were introduced in thickness of the specimen and raster angle during the manufacturing process to identify the significant impact of the failure. The results show a fall in interlaminar tensile strength with increasing specimen thickness and a very large effect from natural printing defects in the samples. The carbon fiber wrap decreased the ILTS but made the results far more consistent between experimental runs. This study provides a good, replicated dataset on the performance of raw and fiber‐wrapped FFF‐processed ULTEM 9085 and gives insights into the structural behavior of the material that will be useful for use in design decisions and material selection. Highlights Polyetherimide, also known as PEI/ULTEM, is a high‐performance engineering thermoplastic. Explored the interlaminar tensile properties (ILTS) of this material using ASTM D6415. Raster angle, thickness, and use of fiber wrap were experimental parameters. Fiber wrap was found to have little effect on strength but made results more consistent. Results are useful for material selection and design decisions using PEI.

Resistance Welding of Carbon Fiber Reinforced Polyetherimide Composit

Synergy of carbon fiber fabric-based heating element and h-BN modified insulated film on resistance welding of thermoplastic composites

Study on thermal-assisted underwater friction stir welding for carbon fiber-reinforced polyetherimide

New Method for Interfacial Evaluation of Carbon Fiber/Thermosetting Composites by Wetting and Electrical Resistance Measurements

Fracture behavior of high‐performance carbon fiber composites toughened by reactive polyetherimide

The Effect of Surface Treatment on the Resistance Welding Technology for Carbon Fiber/Epoxy Resin Composites

Multi-Objective Optimization of Resistance Welding Process of GF/PP Composites

Ultrasonic welding of CF/PEEK composites: Influence of welding parameters on interfacial temperature profiles and mechanical properties

Press Conduction Welding for Secondary Bonding of Aircraft Skin/Stiffener Assemblies Using Carbon Fiber/PEKK Thermoplastic Composites and PEI Adhesive

Cellulose Nanocrystal-Polyetherimide Hybrid Nanofibrous Interleaves for Enhanced Interlaminar Fracture Toughness of Carbon Fibre/epoxy Composites

Computational and experimental study on the resistance welding process of a glass fiber‐reinforced epoxy‐based composite with thermoplastic interlayer adherent

Resistance Welding Joints of CF/PEEK Orthogonal Laminates Strengthened by in situ Grafting of ZnO‐Nanowires: Preparation, Properties, and Mechanism

Resistance welding technology of fiber reinforced polymer composites: a review

Interlaminar tensile properties of raw and carbon fiber‐wrapped additively manufactured polyetherimide

Resistance Spot Welding of CFRTP Composite Laminates.

Epoxy Laminated Composites Reinforced with Polyethyleneimine Functionalized Carbon Fiber Fabric: Mechanical and Thermal Properties

Mechanical characterization of ultrasonically welded CF/PEEK laminates by short beam shear test

Interfacial performance and build orientation of 3D‐printed poly(ether‐ketone‐ketone) reinforced by continuous carbon fiber

Experimental Investigation of Processing Welding Parameters for PPS/Carbon Fiber Laminates for Aeronautical Applications

Mechanical characterization of PEEK-CF/PEEK sandwich structures prepared via a combination of fused filament fabrication and epoxy post-bonding

Fracture toughness and failure behavior of CF/epoxy composites interleaved with melt‐infused PET, PEI, and PEEK film