Abstract:A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on the core diameter, numerical aperture (NA), and the length of the MMF section in the single-mode--multimode--single-mode (SMS) fiber structure are investigated experimentally. The results indicate that the larger core diameter of the MMF leads to higher temperature sensitivity but lower strain sensitivity (absolute values); the higher NA does not influence the temperature sensitivity but results in higher absolute value of strain sensitivity; the longer MMF section brings lower temperature sensitivity but does not have an impact on strain sensitivity. These findings also contribute to the theoretical analysis of the length dependence in the SMS fiber sensors. Besides, the results of the characterization study show that the strain sensitivity is relatively low, which brings a possibility to develop a strain-insensitive temperature sensor. The proposed sensor is used for temperature sensing while the strain is constantly applied from 0 to 1100 $\mu\epsilon$ with steps of 100 $\mu\epsilon$. The measured results are consistent with the comprehensive study. The mean temperature sensitivity is 6.14 pm/$^{\circ}$C with a standard deviation of 0.39 pm/$^{\circ}$C, which proves that the proposed temperature sensor exhibits good stability and is insensitive to strain. We expect that these results will provide a profound guideline to fiber sensors based on multimode interference.

Using Mode Coupling Mechanism in Symmetrical Triple-Core Photonic Crystal Fiber for High Performance Strain Sensing

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Strain-insensitive Twist and Temperature Sensor Based on Seven-Core Fiber

Temperature and Strain Sensor Based on a Few-Mode Photonic Crystal Fiber

High Sensitivity Strain Sensors Using Four-Core Fibers through a Corner-Core Excitation

Photonic crystal fiber strain sensor based on multimode/air spherical cavity structure

Highly sensitive strain sensing using a polarization-maintaining photonic crystal fibre based Mach–Zehnder interferometer

High Sensitivity Optical Fiber Strain Sensor Using Twisted Multimode Fiber Based on SMS Structure

Sensitivity-enhanced Fiber Optic Temperature Sensor with Strain Response Suppression

Sensitivity-Enhanced Strain Sensor Based on Thin-Core Fiber Modal Interferometer Interacted with Tilted Fiber Bragg Grating

Highly Sensitive Strain Sensor Based on a Sealed Optical Microfiber Coupler

A strain-sensitivity-enhanced and asymmetric fiber-optic sensor based on anti-resonance hollow core fiber

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

Strain-insensitive High-Sensitivity Temperature Sensing Based on Multimode Interference in a Square-Core Fiber

Photonic Crystal Fiber Modal Interferometer Based on Thin-Core-fiber Mode Exciter.

An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

Temperature-independent strain sensor based on simplified hollow-core photonic crystal fibers

Dual-Core Photonic Crystal Fiber Transverse-Stress Sensor Based on Surface Plasmon Resonance

A Fabry–Perot Interferometer Strain Sensor Based on Concave-Core Photonic Crystal Fiber

Discrimination Between Strain And Temperature By Cascading Single-Mode Thin-Core Diameter Fibers