Abstract:Sandwich piezoelectric transducers are widely used in many industrial applications due to their attractive advantages of compact structure, no electromagnetic interference, and excellent output performance. V-shaped piezoelectric transducers, a typical design, have been adopted as the stator of ultrasonic motors and the machining tool of elliptical vibration surface manufacturing. However, traditional V-shaped piezoelectric transducers were designed with one contact interface to output effective vibration, limiting their applications. To achieve multi contact areas with synchronous actuation function, a novel three-dimensional sandwich piezoelectric transducer is proposed in this study, expecting to drive wheels of a robotic mobile system. Two orthogonal Langevin transducers are adopted to vertically couple in a cylinder, producing two bending vibrations with a spatial phase difference of pi/2 in the cylinder. Therefore, elliptical motion is generated at surface points of two driving parts placed at both ends of the cylinder. Due to the fact that two front-end blocks of the two Langevin transducers and the cylinder form a three-dimensional configuration which hard to be manufactured by traditional machining methods, this part is printed using laser additive manufacturing. To analyze the dynamic behavior of the proposed three-dimensional transducer, an analytical model is carried out utilizing the transfer matrix method for providing systematic modeling. This developed transfer matrix model is not only capable of greatly reducing computation efforts, and it is maybe suitable for the analysis of traditional V-shaped transducers. To validate this developed transfer matrix model and confirm the feasibility of the transducer design, experimental investigations are conducted to measure the vibration characteristics of the proposed transducer prototype using a 3D laser Doppler vibrometer and are compared to the calculation results. The measured and computed resonant frequencies of the transducer are 19.975 kHz and 20.045 kHz for the symmetrical vibration mode, and 20.07 kHz and 20.06 kHz for the anti-symmetrical vibration mode, respectively. Comparisons show that calculation results match well with the experimental results, demonstrating the effectiveness of the developed transfer matrix model and the feasibility of the three-dimensional transducer design. (C) 2018 Elsevier Ltd. All rights reserved.

Quasi-Spherical PVDF Ultrasonic Transducer with Double-Cylindrical PVDF Structure

Truncated Conical PVDF Film Transducer for Air Ultrasound

Circular PVDF Airborne Transducer

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

A Novel Additive Manufactured Three-Dimensional Piezoelectric Transducer: Systematic Modeling and Experimental Validation

Theoretical and Experimental Study of the Nonlinear Ultrasonic Field Radiated from A Conical Focused Pvdf Transducer

Design and Realization of Directivity Adjustable Ring Transducer

Laminated PVDF Ultrasonic Transducer and Its Spectral Charactor

Design and simulation of a 2-D array flexible ultrasound transducer system for tissue characterization – A pilot study

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Modeling and calculation of acoustic radiation for a free-flooded ring transducer array

Research on Segmented Circular Transducer with Adjustable Transmitting Directivity

An integral wavy shaped P(VDF-TrFE) transducer for audio directional system

A 2D Dual-Mode Composite Ultrasonic Transducer Excited by a Single Piezoceramic Stack

Design and Characterization of High-Density Ultrasonic Transducer Array

A Novel Serrated Columnar Phased Array Ultrasonic Transducer

Numerical and Experimental Analysis of Focused Air-Coupled Ultrasonic Transducer Based on Cross-Linked Polypropylene Film

A Preliminary Evaluation Work on A 3-D Ultrasound Imaging System for 2-D Array Transducer

Quasi-omnidirectional ultrasonic transceiver

A Three-Dimensional Pen-Like Ultrasonic Positioning System Based on Quasi-Spherical PVDF Ultrasonic Transmitter

PMN-PT Single Crystal Ultrasonic Transducer with Half-Concave Geometric Design for IVUS Imaging