Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Theoretical and Experimental Study of the Nonlinear Ultrasonic Field Radiated from A Conical Focused Pvdf Transducer

Broadband Characterization of Near-Field Focusing with Groove-Structured Lens

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Bessel ultrasonic probe based on conical acoustic lens: simulation study

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Theoretical and experimental study of super-harmonic sound propagation and imaging in biological tissues

Design and simulation of a 2-D array flexible ultrasound transducer system for tissue characterization – A pilot study

Numerical and Experimental Analysis of a Focused Reflected Wave in a Multi-Layered Material Based on a Ray Model.

Acoustic Characterization of High Intensity Focused Ultrasound Field Generated from a Transmitter with Large Aperture

Theoretical Prediction of the Acoustical Nonlinear Field Radiated from A Concave Focusing Source with A Wide Aperture Angle

Design and Fabrication of a Novel Dual-Frequency Confocal Ultrasound Transducer for Microvessels Super-Harmonic Imaging

Numerical and experimental investigation of a variable-curvature shell class I flextensional transducer

Theoretical and Experimental Research on the Second Harmonic of Focused Ultrasound in Layered Biological Media

Study of the acoustic nonlinear field generated from a phased array using Gaussian superposition technique

Investigation of an Active Focusing Planar Piezoelectric Ultrasonic Transducer

Investigation of a cascaded piezoelectric transducer with cone horn for multi-mode power ultrasound application

Non-linear Transform of energy in strongly focused finite-amplitude ultrasound

A Modeling Approach to Predict Acoustic Nonlinear Field Generated by a Transmitter with an Aluminum Lens.

Study of Nonlinear Acoustic Field of High Intensity Focused Ultrasound by the Fractional Wave

Study of polymer ultrasonic transducer and complex ultrasonic transducer with PZT/PVDF multi-layer structure

An integral wavy shaped P(VDF-TrFE) transducer for audio directional system