Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Theoretical Prediction of the Acoustical Nonlinear Field Radiated from A Concave Focusing Source with A Wide Aperture Angle

A Novel Approach for Description of Nonlinear Field Radiated from a Concave Source with Wide Aperture Angle

A Modeling Approach to Predict Acoustic Nonlinear Field Generated by a Transmitter with an Aluminum Lens.

Broadband Characterization of Near-Field Focusing with Groove-Structured Lens

Calculation of Aberration Fields for Freeform Imaging Systems Using Field-Dependent Footprints on Local Tangent Planes.

Theoretical and Experimental Study of the Nonlinear Ultrasonic Field Radiated from A Conical Focused Pvdf Transducer

Simulation and analysis of nonlinear self-focusing phenomenon based on ray-tracing

Numerical research on the focusing characteristics of steady state sound field in finite space by combining finite element and phase conjugation methods

Study of the acoustic nonlinear field generated from a phased array using Gaussian superposition technique

Numerical Simulation and Comparison of Nonlinear Self-Focusing Based on Iteration and Ray Tracing

Analytical Beam Forming for Circularly Symmetric Conformal Apertures

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Numerical and Experimental Analysis of a Focused Reflected Wave in a Multi-Layered Material Based on a Ray Model.

Numerical Modelling of Unilateral Point-Focusing Electromagnetic Acoustic Transducer with Experimental Validation

Acoustic Focusing by Symmetrical Self-Bending Beams with Phase Modulations

Inverse Method to Engineer Uniform-Intensity Focal Fields with Arbitrary Shape

Sound Field Prediction of Ultrasonic Lithotripsy in Water with Spheroidal Beam Equations

Non-linear Transform of energy in strongly focused finite-amplitude ultrasound

Acoustic Characterization Of High Intensity Focused Ultrasound Fields Generated From A Transmitter With A Large Aperture

Measurement of the Acoustic Nonlinearity Parameter B/A of Lossy Medium in a Focused Field

Acoustic Characterization of High Intensity Focused Ultrasound Field Generated from a Transmitter with Large Aperture