Abstract:This paper reports a novel capacitive sensing method, enabling accurate and self-calibrated measurements for both the amplitude and phase information in sinusoidal motion. The approach constructively utilizes the inherent nonlinearity of a triangular-electrode based (TEB) variable-area sense capacitor. In the case of TEB detection signal, two harmonics exist and each carries information about the motional amplitude and phase. The TEB method robustly extracts the motional amplitude from the ratio of two sideband amplitudes and extracts the motional phase from the subtraction of two sideband phases. This technique is especially valuable for capacitive detection of periodic motion in MEMS resonant devices, such as the resonant accelerometer and Coriolis vibratory gyroscope. The paper presents detailed theoretical analysis and proposes a real-time measurement algorithm implemented in an FPGA device. Experimental results manifest that, compared with the traditional linear method, the sensitivity of the measured amplitude and phase to system parameter variations is highly suppressed up to 95%. Furthermore, an oscillation control system with TEB capacitive detection is introduced for micro-machined vibratory gyroscopes. First measurement results show the amplitude variance of the drive displacement is 120 ppm in an hour while the phase variance is 80 ppm. Allan variance analysis indicates a bias instability of 6.5 degrees/h for the gyroscope output. (C) 2016 Elsevier B.V. All rights reserved.

Dynamic Characteristics of the Capacitance Control Rod Position Measurement Sensor System in NHR-200

Research on the Capacitance Control Rod Position Measurement Sensor in NHR-200

Research on Static Characteristics of High Precision Capacitance Rod Position Measurement Sensor

Research on Multi-Electrode Capacitance Rod Position Measurement Sensor for NHR-200

Static Calibration Experiments of Capacitance Control Rod Position Measurement Sensor

Study on Static Characteristics of Array Electrode Capacitance Control Rod Position Measurement Sensor

Built-in Capacitance Sensor for Control Rod Position Measurement in NHR-200 with PEEK Material

Static performance of capacitance control rod position sensor: A review

Research on Static Characteristics of Capacitance Rod Position Measurement Sensor with Protection Electrodes

Nonlinear analysis of cylindrical capacitive sensor used for measuring high precision spindle rotation errors

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

Research on Eccentricity Performance of Capacitance Rod Position Measurement Sensor for Measuring Non-Metallic Rod

Control Rod Position Measurement with Helix-Electrode Capacitance Sensor in Nuclear Heating Reactor

Mechanism Model for Effect of Eccentricity on Capacitive Control Rod Position Indicators

Control Rod Position Measurement by Two-Electrode Capacitance Sensor in Nuclear Heating Reactor

Research on Eccentricity Performance of Winding Wire Capacitance Rod Position Measurement Sensor

GROUNDED CONTROL ROD POSITION MEASUREMENT WITH TWO-ELECTRODE CAPACITANCE SENSOR

Dynamics modeling and performance verification of the mechanical flight control system on transport airplane

Dynamic Error Modeling and Compensation of a Scanning Probe on CMM

Review on Sensors to Measure Control Rod Position for Nuclear Reactor

FRINGE EFFECT CAPACITANCE SENSOR FOR CONTROL ROD POSITION MEASUREMENT