Abstract:In recent years, LC resonant sensors have gained widespread attention for their extensive applications in industries such as pharmaceutical storage and food transportation. A wireless passive sensor with a good sensing performance is proposed based on a GO/CNT−OH/Nafion nanocomposite. The sensor was fabricated via inkjet printing technology, and the surface morphology of the GO/CNT−OH/Nafion nanocomposite was characterized by SEM measurement. It is found that the MWCNTs support the GO layer and the hydrophobic chains of Nafion interact with the hydrophobic layer of GO, resulting in a larger cavity and hydrophilic surface of the entire material. This structure well reflects the fact that the mixing of MWCNTs and Nafion provides the entire material with a stronger water absorption. The experimental study shows that the proposed humidity sensor has a frequency variation of 103 kHz/%RH at low humidity (30–60% RH) and a sensitivity of 931 kHz/%RH at high humidity (60–95% RH), while the sensitivity value from 30–95% RH is 547 kHz/% RH. The response time and recovery time are 110 s and 115 s, respectively. In addition, the tests showed that the GO/CNT−OH/Nafion nanocomposite applied to the humidity sensor had a maximum humidity hysteresis of about 3% RH at 30–95% RH, the resonant frequency remained basically unchanged after 50 h of testing, and the whole sensor possessed a good stability. After conducting several repeated experiments, it was found that the resonant frequency error of the whole sensor was low and did not affect the overall sensing test, which proved the reproducible preparation of the sensor. Finally, the humidity-sensing mechanism of the proposed sensor was analyzed in this paper, and it was found that GO enhanced the hygroscopic properties of GO/CNT−OH/Nafion nanocomposite when it was supported by MWCNT-OH and included uniformly dispersed Nafion. Therefore, our proposed humidity sensor is suitable for humidity detection above 30% RH in both sealed and open environments.

SNR-enhanced temperature-insensitive microfiber humidity sensor based on upconversion nanoparticles and cellulose liquid crystal coating

Fast Detection of Humidity with a Subwavelength-Diameter Fiber Taper Coated with Gelatin Film

A Humidity Sensor Based on a Singlemode-Side Polished Multimode–Singlemode Optical Fibre Structure Coated with Gelatin

High-Sensitivity Optical Fiber Humidity Sensor Based on Iridescent Chiral-Oriented Cellulose Nanocrystals/Polyethylene Vinyl Oxide Composite Film

Au Nanorod-Coupled Microfiber Optical Humidity Sensors.

A Cellulose Nanofiber Capacitive Humidity Sensor with High Sensitivity and Fast Recovery Characteristics

High-sensitivity fiber-optic humidity sensor based on microfiber overlaid with niobium disulfide

Highly Sensitive Humidity Sensors Based on Electro-Spinning/Netting A Polyamide 6 Nano-Fiber/Net Modified by Polyethyleneimine

Cellulose Nanofiber/Carbon Nanotube Dual Networks Enabled Humidity Sensor with High Sensitivity and Durability.

High sensitivity Optical Humidity Sensing Based on Polymer Microfiber Cavity Coupled Metallic Nanorod

Enhanced homogeneity and flexibility in a humidity sensor using cellulose nanocrystal-based composite film with circular shear flow

Porous and conductive cellulose nanofiber/carbon nanotube foam as a humidity sensor with high sensitivity

Environmentally-friendly cellulose nanofibre sheets for humidity sensing in microwave frequencies

Graphitic Carbon Nitride for Enhancing Humidity Sensing of Microfibers

A highly sensitive humidity sensor based on a nanofibrous membrane coated quartz crystal microbalance

Flexible and Highly Sensitive Humidity Sensor Based on Cellulose Nanofibers and Carbon Nanotube Composite Film.

A highly sensitive flexible humidity sensor based on a wafer-level composite material of carbon-quantum-dots@nanofiber clusters

Carbon Nanotubes/Graphene Oxide Composite Applications in Fiber RH Sensor

Miniature and high-performance optical fiber relative humidity sensor based on Fabry-Perot structure interacting with hydroxyethyl cellulose

An Excellent Humidity Sensor Made of Surface Acoustic Wave Resonator Coated with MWCNTs/Nafion Composite Material Films

GO/CNT−OH/Nafion Nanocomposite Humidity Sensor Based on the LC Wireless Method