Abstract:The microstructure and mechanical properties of Mg94Y4Zn2 and Mg94Y4Zn1Ni1 alloys have been systematically investigated by optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and an electronic universal testing machine. The as-cast WZ42 alloy is composed of α-Mg matrix, 18R LPSO (long period stacking ordered) phase and a small fraction of Mg24(Y,Zn)5 phases. With the replacement of 1at% Ni atoms, the phase structures in WZN411 alloy remain unchanged, but their chemical compositions vary obviously. A great number of stacking faults exist in α-Mg grains of WZ42 alloy, while they are barely observed in WZN411 alloy. After annealing at 500°C for 12h, there are plenty of 14H LPSO lamellas formed in WZ42 alloy and many nano-scale α-Mg slices generated between 18R phases. In contrast, the 18R in WZN411 alloy is thermally stable, and both the formation of α-Mg slices and 14H lamellas are restricted for annealed WZN411 alloy. Tensile tests indicate that the as-extruded WZ42 alloy exhibits ultimate tensile strength of 390MPa, tensile yield strength of 246MPa and elongation of 2.8% at room temperature. With the replacement of 1at% Ni, the UTS and TYS of WZN411 alloy increase by 20MPa and the ductility improves as well. The improvement of comprehensive mechanical properties could be ascribed to the substitution of 1at% Ni element, which could enhance the degree of solid-solution strengthening and stimulate the thermal stability of 18R phase during annealing and extrusion processes.

Effect of Substitution of Zn with Ni on Microstructure Evolution and Mechanical Properties of LPSO Dominant Mg–Y–Zn Alloys

Microstructure and Mechanical Properties of LPSO Phase Dominant Mg85.8Y7.1Zn7.1 and Mg85.8Y7.1Ni7.1 Alloys

Effect of the Partial Substitution of Zn with Co, Ni, and Co-Ni on Microstructures and Mechanical Properties of Long-Period Stacking Ordered Dominant Mg-Y-Zn Alloys

Substitution of Ni for Zn on microstructure and mechanical properties of Mg–Gd–Y–Zn–Mn alloy

Microstructure and mechanical properties of LPSO dominant Mg-2Y-Cu-TM (TM=Cu, Zn, Co, Ni) alloys

Effect of substitution of 1at% Ni for Zn on the microstructure and mechanical properties of Mg94Y4Zn2 alloy

Effects of Ni Levels on Microstructure and Mechanical Properties of Mg-Ni-Y Alloy Reinforced with LPSO Structure

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Improved Strength in Wrought Mg–Y–Ni Alloys by Adjusting the Block-Shaped LPSO Phase and Plate-Shaped Γ′ Phase

Effect on Zn on Microstructures and Mechanical Properties of Mg–Gd–Y–Zn LPSO Alloys

Effect of the Morphology of Long-Period Stacking Ordered Phase on Mechanical Properties and Corrosion Behavior of Cast Mg-Zn-Y-Ti Alloy

Microstructure and Damping Properties of LPSO Phase Dominant Mg-Ni-Y and Mg-Zn-Ni-Y Alloys

Microstructures and Mechanical Properties of Mg-2Y-xZn (x=1, 2, 3 At%) Alloys

Structural Features and Mechanical Properties of Mg-Y-Zn-Sn Alloys with Varied LPSO Phases

Effect of Volume Fraction of LPSO Phases on Corrosion and Mechanical Properties of Mg-Zn-Y Alloys

Effect of Sn element on the formation of LPSO phase and mechanical properties of Mg-6Y-2Zn alloy

A High Strength and Toughness Mg-Y-Ni Alloy with a Long-Period Stacking Ordered Structure

Microstructure And Mechanical Properties Of Mg94y4zn1ni1 Alloy With Long Period Stacking Ordered (Lpso) Phase

Influence of the morphology of long-period stacking ordered phase on the mechanical properties of as-extruded Mg-5Zn-5Y-0.6Zr magnesium alloy

Unveiling the strengthening effect of LPSO phase in a Mg-Y-Zn alloy

Microstructures and properties of as-cast rare Earth magnesium alloy with LPSO phase