Abstract:Rolling element bearings are one of the key components of many rotating machines. Through condition monitoring and vibration analysis of bearings, valuable information about the health status of the machine can be obtained, such as detection of a local fault, unbalance, and misalignment. For more than three decades, various bearing dynamic models have been developed by researchers to simulate the acceleration signal of the bearing and enhance the understanding of bearing vibration response in case of having local defects. Nevertheless, recent studies have shown that measurement of local strain in the bearing can be more effective in fault diagnosis of bearings since local strain signal is less subjected to surrounding noise and non-fault interferences. However, previously developed dynamic models lack a deep study on simulating strain signals at different locations in a bearing. Therefore, this paper presents the result of a combined lumped parameter and finite element models (FEMs) for simulating strain signals of a cylindrical roller bearing in healthy and defective conditions. Contrary to previous combined dynamic models, more realistic modeling assumptions are adopted, such as applying contact pressure to the raceway rather than concentrated nodal forces. The contact pressures are obtained from the lumped parameter model and exported to the FEM for transient analysis. The accuracy of the model in generating stress distribution is validated by a static 2D finite element contact model and theoretical formulas. Dynamic responses of the bearing, such as strain changes at different locations, are investigated in the time and frequency domains to investigate the fault symptoms such as sharp impulses and amplitude modulation. Lastly, the effect of a transmission path on strain measurement and using residual strain signal for fault diagnosis are discussed. Overall, the proposed model is an effective method for strain simulation of healthy and defective roller bearings.

Dynamic Characteristic Prediction of a 5-DOF Hybrid Machine Tool by Using Scale Model Considering the Geometric Distortion of Bearings

Dynamic Analysis Of A 5-Dof Hybrid Machine Tool By Using Its Scale Model Considering Geometric Distortion Of Revolute Joint

Volumetric error modeling and decoupled error compensation analysis of five-axis CNC machine tools

Kinematic Chain Optimization Design Based on Deformation Sensitivity Analysis of a Five-Axis Machine Tool

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Milling Stability Prediction of a Hybrid Machine Tool Considering Low-Frequency Dynamic Characteristics

Hybrid dynamic modeling of a high-speed ball-screw drive system

Dynamic Analysis of the 2-DOF Planar Parallel Manipulator of a Heavy Duty Hybrid Machine Tool

Dynamic Modeling and Simulation of a Hybrid Robot

Dynamic Modeling and Performance Evaluation of a 5-DOF Hybrid Robot for Composite Material Machining

Dynamic model and force control of the redundantly actuated parallel manipulator of a 5-dof hybrid machine tool

Dynamics Prediction of Spindle System Using Joint Models of Spindle Tool Holder and Bearings

Dynamic Model and Dynamic Characteristics of a 3-DOF Spindle with a Parallel Linkage Mechanism

Dynamic Modeling Of Multi-Axis Synchronous Gantry Machining Center

Dynamic simulation of a cylindrical roller bearing with a local defect by combining finite element and lumped parameter models

Bearing Dynamics Modeling Based on the Virtual State-Space and Hammerstein–Wiener Model

Dynamic Simulation of a Multi-axis Synchronous Gantry Machining Center

Mechatronics modeling and vibration analysis of a 2-DOF parallel manipulator in a 5-DOF hybrid machine tool

A fully analytical nonlinear dynamic model of spindle-holder-tool system considering contact characteristics of joint interfaces

Dynamic Modeling and Simulation of Inter-Shaft Bearings with Localized Defects Excited by Time-Varying Displacement