Abstract:Silver isotopes have been extensively used in environment, archaeology, and economic geology. Nevertheless, accurate analysis of Ag isotope ratios faces challenges caused by the presence of matrix elements ( e.g. Zn, Cu, and Pb) in most sulfide samples due to isobaric and polyatomic interferences during multi-collector inductively coupled plasma mass spectrometry (MC-ICPMS) routines. Most of these elements, such as Cu and Pb, can be effectively removed after the first column through a tandem column setup. However, the complete removal of Zn from Ag remains a significant unresolved issue, particularly given their common coexistence in sulfide minerals. Combining previous studies and the chemical principle of ion exchange resin, we optimized a two-stage ion exchange procedure by meticulously adjusting solution volumes and the column separation process. A condensed Zn-doped NIST SRM (silver international standard reference material) 978a was tested for AG50W-X8 resin following our modified procedure, resulting in distinct elution curves of Ag and Zn. Subsequently, three sphalerite samples were selected for the optimized two-stage ion exchange procedure, and ICP-MS results of silver elution fractions demonstrated complete separation of Ag and Zn. The whole procedure achieved an Ag yield exceeding 98.1 ± 2.3% (2SD, n = 4). NIST SRM 978a and IAEA-S-1 (an in-house standard) were tested for long-term reproducibility with −0.001 ± 0.030‰ (2SD, n = 25) and 0.054 ± 0.023‰ (2SD, n = 22) of δ 109 Ag, respectively, indicating the high accuracy in MC-ICPMS routines. Zn-doped NIST SRM 978a and sphalerite samples were further subjected to the modified procedure, and they exhibited values of 0.004 ± 0.014‰ (2SD, n = 3) and −0.214 ± 0.033‰ (2SD, n = 12), respectively, for δ 109 Ag. Moreover, we selected eight sphalerite samples from several hypogene deposits in China and obtained δ 109 Ag values from −0.229‰ to 2.227‰, indicating the significant Ag isotopic fractionation between Ag-bearing and Zn-rich minerals in hypogene deposits. In conclusion, this study shows the feasibility of accurately measuring Ag isotopes in Zn-rich samples and reveals their application potential in related Ag-bearing and Zn-rich deposits.

Determination of the Zn Content in Zincian Malachite by X-ray Diffraction

The Effect of Cu–Zn Distribution in Zincian Malachite on the Formation of Individual CuO and ZnO Particles

Micro X-ray fluorescence (μ-XRF) methodology for quantitative elemental imaging of Al-Zn-Mg-Cu alloys with varying chemical compositions

Determination of Micro Zn in Common Salt Byflame Atomic Absorption Spectrometry

High-precision measurement of chlorine in sphalerite by electron probe microanalysis: Method and application

Determination of Zinc Ions in Environmental Samples by Dispersive Liquid- Liquid Micro Extraction and Atomic Absorption Spectroscopy

Determination of zinc in plant samples by isotope dilution inductively coupled plasma mass spectrometry

Calibrated X-ray micro-tomography for mineral ore quantification

Accurate determination of stable silver isotopes in zinc-rich samples through effective separation of silver and zinc

Determination of Major, Minor, and Trace Elements in Jadeite using Scanning micro-X-ray Fluorescence

Determination of Iron, Lead and Nickel in Zinc Powder by Atomic Absorption Spectrometry

Development and Validation of a Method for Trace Level Zinc Quantification in Pharmaceutical Zinc Supplements Using a Carboxyl Functional Group Packed Column and Refractive Index Detector

Precise calibration of Mg concentration in MgxZn1-xO thin films grown on ZnO substrates

Quantitative Deviation of Nanocrystals Using the RIR Method in X-ray Diffraction (XRD)

Determination of Zinc in Gas Cleaning Dust Emissions from Electrometallurgical Production

Quantitative Phase Analysis of Skarn Rocks by the Rietveld Method Using X-ray Powder Diffraction Data

Feasibility of pyrohydrolysis and extended-steam distillation method for the extraction of two halides from zinc and lead concentrate samples followed by ion chromatography analysis

Determination of Indium in Metallic Zinc by Flame Atomic Absorption Spectrometry after Extraction with L-Phenyl-3-methyl-4-benzoyl-5-pyrazolone

Determination of manganese, nickel, copper, zinc, lead, rubidium and strontium in geogas samples by total reflection x -ray fluorescence spectrometry

Determination of zinc in dried nuts by slotted quartz tube-flame atomic absorption spectrometry (SQT-FAAS) with citric acid-coated magnetic nanoparticle (CAMNP) based solid phase extraction (SPE)

Enhancement and refinement of SSP method for XRD analysis and investigation of structural properties of pure and Ca-doped zinc oxide