Abstract:Background: Platinum (Pt), palladium (Pd), rhodium (Rh) and iridium (Ir) are platinum group elements (PGEs) and also important elements of geochemistry and environmental chemistry with the similar physic-chemical properties, which have been widely used in industry and laboratory. However, due to the low abundance and inhomogeneous distribution in natural ore as well as the nugget effect, the accurate determination of PGEs has been a challenge to analytical chemistry. Methods: In this work, a novel fire assay method was reported for the determination of ultra-trace Pt, Pd, Rh and Ir in geochemical samples. Tin powder (Sn) instead of stannic oxide (SnO 2 ) was used as a fire assay collector to reduce the melting temperature from 1250°C to 1050°C, the escape of molten material caused by high temperature was successfully avoided. Tin bead was compressed into thin slice and dissolved by HCl. For the target Pt, Pd, Rh and Ir, HCl insoluble substance such as PtSn 4 , PdSn 4 , RhSn 4 and Ir 3 Sn 7 were formed and separated from matrix by filtering. The metal compounds precipitate together with filter paper were microwave-assisted completely digested by aqua regia (50%, v/v), thence the sample solution was determined by inductively coupled plasma mass spectrometry (ICP-MS). Results: Compared with nickel oxide and lead oxide in nickel sulfide /lead fire assay, the reagent blank of tin powder were relatively low and could be directly employed in tin fire assay to collect Pt, Pd, Rh and Ir without purifying. Moreover, the harm of nickel oxide and lead oxide to the analyst and environment was avoided by using the non-toxic tin powder. The decomposition method of chromite and black shale was investigated as well as the amount of tin powder and flour, microwave digestion program for the determination of Pt, Pd, Rh and Ir were optimized. Besides, the influence of mass spectrum interference of co-existing elements was discussed and the standard mode and kinetic energy discrimination collision pool mode were compared. Under the optimal conditions, excellent curve fitting of Pt, Pd, Rh and Ir were obtained between 0.01~100 ng mL -1 , with the correlation coefficients exceeding 0.9996. The detection limits were from 0.003 ng g -1 to 0.057 ng g -1 . Conclusion: The developed method was applied to analyze the Chinese Certified Reference Materials and the determined values were in good agreement with the certified values.

Determination of manganese, nickel, copper, zinc, lead, rubidium and strontium in geogas samples by total reflection x -ray fluorescence spectrometry

X-ray fluorescence spectrometric determination of major, minor and micro elements in rocks

Simultaneous Determination of Multi -Element in Geochemical Exploration Samples by X -Ray Fluorescence Spectrometry

The Determination Of Ge By Atomic Fluorescence Spectrometry With Electrochemical Hydride Generation

Trace elements determination by femtosecond LA-ICP-MS of 10 mg extraterrestrial geological samples prepared as lithium borate glasses

Uncertainty Evaluation for Determination of Trace Elements in Rock by Inductively Coupled Plasma Atomic Emission Spectrometry

The analytical methods for determination of platinum group elements in geological samples.

Review on the Elemental Analysis of Polymetallic Deposits by Total-Reflection X-ray Fluorescence Spectrometry

Determination of Tin in in Copper,Lead and Zinc Ores by Emission Spectrometry

Determination of Trace Elements in Sulfide Samples by Inductively Coupled Plasma-Mass Spectrometry

Determination of Trace Ag, Au, Ge, Pb, Sn and Te by Microwave Plasma Torch Atomic Emission Spectrometry Coupled with an Electrothermal Vaporization Sample Introduction System.

DETERMINATION OF Pb AND Cd ELEMENTS IN PAPER FOR FOOD-PACKAGING BY SS-GFAAS

Simultaneous Determination of 15 Elements in Sedimentary Rock Samples by Inductively Coupled Plasma-Atomic Emission Spectrometry

Determination of Total Selenium in Geological Samples by HG-AFS

Determination of Trace Elements in Some Seasonings by Microwave Digestion-high Resolution Continuum Source Graphite Furnace Atomic Absorption Spectrophotometry

Ultrasensitive Determination of Gold in Geogas by Laser Excited Atomic Fluorescence Spectrometry

Studies on the element characteristics of nephrite minerals from different deposits by GD-MS

Atmospheric pressure glow discharge optical emission spectrometry coupled with laser ablation for direct solid quantitative determination of Zn, Pb, and Cd in soils

Simultaneous Determination of Ultra-trace Pt, Pd, Rh and Ir in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry Following Tin Fire Assay Preconcentration and Microwave Digestion

Study of the chemical composition of coal and coal ash by X‐ray fluorescence method: A review

Micro X-ray fluorescence (μ-XRF) methodology for quantitative elemental imaging of Al-Zn-Mg-Cu alloys with varying chemical compositions