Abstract:Inductively coupled plasma mass spectrometry(ICP-MS) is the most commonly used technique to determine the abundances of trace elements in a wide range of geological materials. However, incomplete sample digestion, isobaric interferences and instrumental drift remain obvious problems that must be overcome in order to obtain precise and accurate results. For this reason, we have done many experiments and developed a set of simple, cost-effective and practical methods widely applicable for precise and rapid determination of trace element abundances in geological materials using ICP-MS. Commonly used high-pressure digestion technique is indeed effective in decomposing refractory phases, but this inevitably produces fluoride complexes that create new problems. We demonstrate that the fluoride complexes formed during high-pressure digestion can be readily re-dissolved using high-pressure vessel at 190 °C for only 2 h for 50 mg sample. In the case of isobaric interferences, although oxide(e.g., MO+/M+) and hydroxide(e.g., MOH+/M+) productivity is variable between runs, the(MO+/M+)/(Ce O+/Ce+)and(MOH+/M+)/(Ce O+/Ce+) ratios remain constant, making isobaric interference correction for all other elements of interest straightforward, for which we provide an easy-to-use off-line procedure. We also show that mass-time-intensity drift curve is smooth as recognized previously, for which the correction can be readily done by analyzing a quality-control(QC) solution and using off-line Excel VBA procedure without internal standards. With these methods, we can produce data in reasonable agreement with recommended values of international rock reference standards with a relative error of <8% and precision generally better than 5%. Importantly, compared to the widely used analytical practice, we can effectively save >60% of time(e.g., <24 h vs. >60 h).

Semi-Quantitative Analysis of Geological Samples Using Laser Plasma Time-Of-Flight Mass Spectrometry

Standardless Semi-quantitative Elemental Analysis of Steel Using Laser Ablation Time-of-flight Mass Spectrometry

Semiquantitative Multielemental Analysis of Biological Samples by a Laser Ionization Orthogonal Time-of-flight Mass Spectrometer.

A New Analytical Mode and Application of the Laser Ablation Inductively Coupled Plasma Mass Spectrometer in the Earth Sciences

Approaching Standardless Quantitative Elemental Analysis of Solids: Microsecond Pulsed Glow Discharge and Buffer-Gas-Assisted Laser Ionization Time-of-Flight Mass Spectrometry

The Analysis of Ores by Laser Ablation and Ionization Time-of-Flight Mass Spectrometer and Technique Comparison

Trace elements determination by femtosecond LA-ICP-MS of 10 mg extraterrestrial geological samples prepared as lithium borate glasses

Applicability of standardless semiquantitative analysis of solids by high-irradiance laser ionization orthogonal time-of-fight mass spectrometry.

Elemental Imaging Via Laser Ionization Orthogonal Time-of-Flight Mass Spectrometry

Rapid Analysis of Soil Samples by Laser Ionization Mass Spectrometry

Simple and Cost-Effective Methods for Precise Analysis of Trace Element Abundances in Geological Materials with ICP-MS

Direct Quantitative Analysis of Fluorine in Solid Samples by Cryogenic Laser Ablation and Ionization Time-of-Flight Mass Spectrometry.

A novel method for metallic element analysis in particle samples using a laser-induced breakdown spectroscopy technique

Helium Plasma Source Time-Of-Flight Mass Spectrometry: Off-Cone Sampling For Elemental Analysis

Toward Quantitative Analysis of Trace Element in Speleothems Using Laser-Induced Breakdown Spectroscopy

Mass spectrometry of solid samples in open air using combined laser ionization and ambient metastable ionization

Single Particle Measurement of Suspended Soil Dust Using Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry

Simultaneous measurement of major, trace elements and Pb isotopes in silicate glasses by laser ablation quadrupole and multi-collector inductively coupled plasma mass spectrometry

Femtogram Detection and Quantitation of Residues Using Laser Ionization Orthogonal Time-Of-Flight Mass Spectrometry

Elemental Imaging of Mineral Surface by Laser Ionization Time-Of-Flight Mass Spectrometry

Parametric Evaluation of Laser Ablation and Ionization Time-of-flight Mass Spectrometry with Ion Guide Cooling Cell