Abstract:Gas foil bearings have bright application prospects in oil-free turbomachinery such as aircraft air cycle machines, compressors and gas turbines. To extend the applicability of foil bearings to high-speed and heavy-load systems, the axial force produced primarily by the pressure difference between the turbine and compressor sides must be taken into consideration. The thrust disc of the rotor is typically used to sustain the axial force and maintain the attitude of the rotor in a rotor-bearing system. In an analytical model used to predict the performance of gas foil thrust bearings (GFTBs), fluid–structure interaction must be considered because of the coupling effects of hydrodynamic lubrication and the compliance of bearing surface. In this study, a link-spring structural model was employed to calculate the equivalent vertical stiffness of the bump foil. This model exhaustively considered the effect of three factors: flexibility of the bump foil, interactions between bumps, and frictional forces at the contact surfaces. In addition, top foil deflection that directly affects film thickness is calculated using a finite-element shell model. The static and dynamic characteristics of GFTBs were predicted after solving the steady-state Reynolds equation and two linearized dynamic coefficient equations which were obtained with perturbation method by using finite-difference method. The structural deformation equation was substituted into the Reynolds equations in the calculation process. The calculated static load was compared with the published experimental data, and the results validated the theoretical analysis. Thereafter, the static and dynamic characteristics including impact of rotational speed, initial minimum film thickness and the ratio of the inlet to outlet film thicknesses were analyzed. Parametric studies were also conducted to evaluate the effect of different structural parameters of the bump foil and journal tilting on the static characteristics of GFTBs. Because the proposed analytical model is completely algebraic, it can be easily programmed for accurately and effectively investigating the performance of GFTBs.

Experimental and Theoretical Investigation of Rotordynamic Characteristics of a Rigid Rotor Supported by an Active Bump-Type Foil Bearing

An Experimental Study into Dynamic Behavior of a Magnetorheological Fluid Squeeze Film Damper – Overhung Flexible Rotor

Investigations on the nonlinear dynamic characteristics of a rotor supported by hybrid foil magnetic bearings

Numerical investigation on the rotordynamics of a high-speed air compressor supported by gas foil bearings

Experimental and Theoretical Investigation on Dynamic Behavior of a Flexible Rotor Supported on a Shear-Type Magnetorheologic Fluid Damper

Numerical and Experimental Studies on Stability of Cryogenic Turbo-Expander with Protuberant Foil Gas Bearings

Output Feedback Dynamical Compensation Via EigenStructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems.

Numerical and experimental investigation on dynamic performance of bump foil journal bearing based on journal orbit

Development and performance research of a new-type air foil bearing with combined bump foils

Vibration Control of an Active Magnetic Bearings Flexible Rotor System Based on Adaptive Recursive Least Square Algorithm

Stability and Vibration Characteristics of A Rotor-Gas Foil Bearings System with High-Static-Low-Dynamic-Stiffness Supports

Modeling and Stability Characteristics of Bump-Type Gas Foil Bearing Rotor Systems Considering Stick–slip Friction

Running Performance of a Squeeze Film Air Bearing with Flexure Pivot Tilting Pad

Parametric study on static and dynamic characteristics of bump-type gas foil thrust bearing for oil-free turbomachinery

Unbalance Compensation for Active Magnetic Bearing Rotor System Using a Variable Step Size Real-Time Iterative Seeking Algorithm.

Effects of bearing clearance and supporting stiffness on performances of rotor-bearing system with multi-decked protuberant gas foil journal bearing

Rotor dynamic experimental investigation of an ultra-high-speed permanent magnet synchronous motor supported on a three-pad bidirectional gas foil bearing

On-line Unbalance Identification of Flexible Rotor System

A nonlinear model for dynamic performance analysis of gas foil bearing-rotor system considering frictional contacts

Nonlinear Dynamic Analysis of a Rotor-Porous Air Journal Bearing System With O-Rings Mounted

DYNAMIC RESEARCH AND DESIGN OF THREE-DIMENSIONAL ALL GAS FOIL BEARING ROTOR SYSTEM